I have a ford explorer 1995 The cruse control is out The 4x4 won't switch no light The dash display dosnt show or switch to c to f The compass dosnt work beside that the truck is perfect pls help pls pls winter in Alberta coming

SOURCE: cruse control not working

Check the air control hoses for the cruise control.

SOURCE: 4W will not turn on ford ranger 1999 4x4

that clicking sound you no longer hear is a relay switch behind dashboard ....aftermarket one's sold at all chain auto parts stores

SOURCE: 2001 Trooper: Front axle will not engage when I press dash 4x4 switch

hi guys i would check all the small vacume pipes that conect the sol valves toi the vacume actuators having just replaced the engen in mine i found that these do not have any clips holiding them on tight and can get oil on them and become oversized and leak you can test the diaframes in the actuators by putting a length of pipe on one port and sucking by mouth you can hear the actuator move and then find you can put toung on end of pipe and it will hold a vacume if it does not then chances are the actuator diafram id u/s hope this helps bill

SOURCE: How do you install a 4x4 control module for a 2004 Ford Explorer.

do you mean the elect. control module if so it is behind the radio youll will need the radio tools to take the radio out they can be found at most any parts stores.

SOURCE: 02 Ford Explorer XLT 4x4 High light flashes and

I had same problem on my 2002 explorer. Its either the computer module, or the electric solenoid on the transfer case. In my case it was both. The computer module I had done twice in 14 months.