- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to take ur steering wheel off check your blinker some times it brakes when
You push to hard and it stays on the blinker it broke on..
And for your window it's probably striped
you have a left side turn signal out in the front or back replace bulb the reason why your bilnkers wont blink is because your flasher relay is bad the relay will be located n the fuse panel under the drivers dash any auto parts store should have the light and the relay in stock replace both of those and youll be in buisness
There are 2 common things that cause this. 1. the hazzard flasher is faulty. the hazzard button and the turn signal flasher are all in one. Sometimes pushing the hazzard button in slightly will get the noise to happen, and is an indication it is faulty. 2. The turn signal switch in the steering column is bad. Turning the turn signal from left to right- very fast and harshly, will sometimes clear it up for awhile. Tech JK --------------
The problem with the blinker staying on is most likely the cancel spring. In the steering column you have two cancel springs, one for the right turn signal and one for the left turn signal. your left turn cancel spring is probably broken. to replace this spring requires removing the steering wheel and components. on some models you have to replace the whole turn signal module cause it's all one piece. Check with your local dealer or parts store to see which one you have. Hope this helps you out.
×