P0113 - It is Intake Air Temperature Circuit High (IAT) Input.
First make sure you IAT connector is secure and wiring is intact.
Check your air filter first to see if it is dirty.
Try cleaning intake and throttle body.
Finally could be faulty IAT
SOURCE: Cracked screen on 2004 lexus rx330 nav unit
UNKNOWN BUT TOO REPLACE
IF YOU CAN SEE THE RADIO DON'T REPLACE IT
BUT ITS A LEXUS THE CAR IS 1 OF A KIND IT SELF BESIDES THE CRACK IN THE RADIO
GET A NEW 1 WITH BLUETOOTH by ALPINE and get yo stunt on its 2009
THE WORLD IS CRACKED NOT NAVIE GLASS
SOURCE: 2004 Lexus RX330 Battery Replacement
You just had to disconnect the negative off the old battery first. Then you disconnect the positive and it happens to touch metal it won't short anything out. Make sure you can not wiggle the cables, that the connectors at the battery can't spin or move at all. Tighten them more if necessary, try to start it. Let me know if you still have problems.
SOURCE: How to replace Lexus RX330 headlights.
replacing the headlights is easy. There is no need to adjust the afs, is is automatically done within the vehicle. Changing the bulbs doesn't affect the afs system at all.
SOURCE: 1998 Jeep Grand Cherokee Laredo 4.oL I got a code po113
Trouble Code: P0113 (4.0L L6 VIN S Auto)
IAT Sensor Circuit High Input
Print this code data
Number of Trips to Set Code: 1
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Trouble Code Conditions:
Check with ignition on or engine running; battery voltage more than 10v; The PCM detected the IAT Sensor input was over 4.90v (exc. Dakota, Durango, Ram) or 4.98v (Dakota, Durango, Ram) for 3 seconds.
Possible Causes:
SOURCE: 2005 Lexus RX330 Airbag light always on
If it is the passenger side, do you have some thing on your passenger seat? is it the air bag off light.
There is a connector under the seat. pusher it together to see if it is loose.
376 views
Usually answered in minutes!
×