On my 2000 jeep cherokee sport, there are 3 latch assemblies under the hood, the latch on the drivers side broke, but the other 2 are fine, is it safe to drive until the dealer gets the 1 i need in

SOURCE: 1989 Jeep Cherokee - Electrical Problem - horn, brake lights, blinkers, radio/cd...

I think I have found the problem. When I wiggle the ignition switch the turn signals and radio go on and off so I feel the issue is in the ignition switch. From what I understand the actual electronics for the switch are at the base of the sterring column behind the lower dash panel and is connected by a rod that may need adjusting.

SOURCE: 01 Jeep Cherokee Hood latch cable broke

look in through grill you should see where cable hooks to latch should be able to pop it there may need a long tool to reach it

Marvin

• 85242 Answers
• Posted on Mar 02, 2009

SOURCE: Turn signals not working on 2001 Jeep Grand Cherokee

replace the turns signals flasher unit.

SOURCE: 2000 jeep cherokee 4wd hood latch system broken - how do I open

It can be a pain, even for a skill mechanic, BUT you have to get under and trip the leaver or sometime if the cable broke on the inside you can strip the cable shroud and use plyers to pull the cable

SOURCE: HOOD RELEASE CABLE CAME UNDONE AT THE LATCH ASSEMBLY. HOW DO I OPEN IT WITH OUT THE CABLE WORKING?

remove front grille then you have to fiddle about with the catch it is quite tedious but the only way or take to a dealrship