2007 Ford Explorer Eddie Bauer Logo
D
Dana Balacic Posted on Oct 14, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

2007 Ford Explorer Eddie Bauer stalls while driving. All instrument lights come on. Does restart. (1st time it happened, it started right back up. 2nd time, started only after it sat for 1/2 hr.) 2 different repair garages hooked it up to their computer and neither were able to identify a problem. Any advice on what to have checked next would be greatly appreciated.

  • Ian Law Feb 06, 2014

    I had exect same proplem but after several times of stalling or not starting the engine light light up and there was a code for the mechanic to diagnose, I was told it was the Torque converter & solinoid (By Midas) and after $1,300.00 They only replaced the solinoid body? and charged the same price, and the car is still not starting sometimes and there is trans leak, they beter fix it, was told it was covered but we will see!!!

×

1 Answer

Ken Long

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

  • Ford Master 622 Answers
  • Posted on Oct 16, 2013
Ken Long
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

Joined: Nov 20, 2010
Answers
622
Questions
3
Helped
136343
Points
1659

You might try changing your camshaft position sensor it will not usually turn your check engine light on and will usually start after sitting until it cools down. if this was helpfull please leave me good feed back

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Aug 25, 2009

SOURCE: Ford Explorer Oil change rest message

Turn ignition on. Don't start the car. When the message shows up press setup. It will tell you to press reset to reset the oil life to 100 %.

Ad
harley9701ha

Bill

  • 424 Answers
  • Posted on Oct 08, 2009

SOURCE: i have 98 eddie bauer ford explorer with headlight problems

The headlamp switch will cause the lamps to turn off. The switch heats up and turns the headlamps off. It will cool down and work for about 10 minutes and cut out,

Jonah Oneal

  • 14092 Answers
  • Posted on Jan 11, 2010

SOURCE: My 1999 Ford Explorer Eddie Bauer windows and

CHECK VENT WINDOW MOONROOF FUSE AND RELAY.IT TIED INTO SAME CIRCUIT POWER WINDOWS AND INTERIOR LIGHTS.,

Anonymous

  • 1 Answer
  • Posted on Feb 05, 2010

SOURCE: I have a 2003 Ford explorer (eddie Bauer series)

I have the same problem what do i do?

Jonah Oneal

  • 14092 Answers
  • Posted on May 06, 2010

SOURCE: My 1993 ford explorer stalls right out after 15 mins of driving

FAULTY FUEL PUMP.A BAD FUEL INJECTOR .OR COULD BE IDLING TOO LOW ALSO IF ENGINE GETTING TOO HOT OR OVERHEATING.CHECK THE ANTIFREEZE LEVEL.TO SAVE TIME AND MONEY HAVE IT SCANNED.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
2answers

2006 Ford Explorer 4.6 Eddie Bauer Edition. What shows you the outside temp while you are driving?

Did you by chance check for DTC'S diagnostic trouble codes?

Instrument Cluster Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1255 Air Temperature External Sensor Circuit Open Instrument cluster Go To Pinpoint Test E . B1257 Air Temperature External Sensor Circuit Short to Ground Instrument cluster Go To Pinpoint Test E . B2097 Compass Module Failure Instrument cluster Go To Pinpoint Test B . U2013 Compass Module - No Response Instrument cluster Go To Pinpoint Test B . All Other DTCs - Instrument cluster REFER to Section 419-10 .
0helpful
2answers

Where is the fuse for sun visor lights located

Just Google 2007 Ford Explorer Eddie Bauer Fuse Diagram
1helpful
2answers

I have a 2007 Eddie Bauer Explorer how do I fix the message center that keep flashing circle slowly then it flashes calibrate complete.

Do you have base instrument cluster) or high series instrument cluster) ?
Symptom Chart Condition Possible Sources Action
  • The message center is not operating correctly (base instrument cluster)
  • Instrument cluster
  • OBSERVE the operation of the message center when pressing the TRIP/SELECT button. Does the message center display change when the TRIP/SELECT button is pressed?
    • If the message center display changes, the system is operating normally at this time.
    • If the message center display does not change, INSTALL a new instrument cluster. REFER to Section 413-01 . TEST the system for normal operation.
  • The message center is not operating correctly (high series instrument cluster)
  • Message center switch
  • Instrument cluster
  • Go To Pinpoint Test A .
0helpful
1answer

2008 Ford Explorer Eddie Bauer Driver Seat moves and light goes on while driving

Most likely a failing driver door latch internal contact switch , GEM module thinks it sees door open and kicks seat back and turns dome lite on. Use of a scanner to access GEM will show codes to verify issue.
0helpful
1answer

2007 ford explorer interior lights work then do not then work

if the problem is happening only when the door is open, it could be a bad connection in the door jamb switch that turns on the lights when you get in.

If it comes and goes while you are driving, the problem could be in the headlight switch/light dimming knob.

loose connection or faulty switch is my guess here.
0helpful
1answer

My Ford explorer 2007 Spanner symbol appear on dashboard when i drive a minute over 100KM/H then when i reset it dose not come back till i turn off the car and restart it and drive again over 100KM/H for...

l on the axle shaft ends for a ring with teeth this is a abs reluctor ring look for a crack in the ring the crack at higher speeds sends a signal with a different speed the the other wheels triggering a traction light
0helpful
2answers

Wrench, ABS, aniti skid, 4x4 lights on dash

First thing to do is have the computer scanned for trouble codes.
2helpful
1answer

2007 FORD EXPLORER XLT

need to set tires at correct pressure you can find a sticker on the inside of drivers door to tell you the correct pressure after you do that it sould reset the light after you drive
2helpful
1answer

I have 98 eddie bauer ford explorer with headlight problems. Headlights work when first starting up and then about ten minutes into drive the dash lights flicker and then headlights go out. If i pull the...

The headlamp switch will cause the lamps to turn off. The switch heats up and turns the headlamps off. It will cool down and work for about 10 minutes and cut out,
Not finding what you are looking for?

528 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...