SOURCE: BMW Keyless Entry not working
hi, to program the keys to the vehicle is quite simple
1) open the vehicle, sit inside and close the door
2) insert the key in the ignition and turn to position 1 so that just the air bag light illuminates
3) press and hold the unlock button on the key and remove the key from the ignition (do not release the unlock button)
4) while still holding the unlock button with the key removed press the lock button 3 times
5) release the unlock button on the remote and the door locks should lock and unlock if the proceedure has been carried out correctly
6) to program any other key(s) press and hold the unlock button on remote and again press the lock button 3 times but do not insert it into the ignition or turn the ignition on as done previous.
you may want to print these instructions and read them a few times before proceeding, if you muck up the process while programing keys, no harm will be done, you just have to start the process over. hope this is of some help, regards mark.
SOURCE: i just bought a 2000 bmw 540i and the battery is dead
If the battery dont got power then its your altinator because thats what keeps its battery OR it could possiably be the wires and spark plugs
64 views
Usually answered in minutes!
×