05 JAG no turn signal interior dome lights door ajar light on

I assume you checked bulb.
https://www.bing.com/videos/search?q=05+chevy+van+door+light+switch&docid=608024802170650134&mid=77624CA6946820FC649F77624CA6946820FC649F&view=detail&FORM=VIRE

GM Truck Door Latch - Dome Light Fix - Bing video

Members Shed Light on Fixing a Chevy Dome Light - ChevroletForum

Door ajar indicator/ dome light stuck on. Try this first before replacing switch - Bing video

Principles of Operation
Interior Lighting The interior lighting is broken down into two groups: the courtesy lamps and the illuminated entry lamps. Both lighting features interact with the courtesy light arbitrator. The battery saver is also listed in this section.
Courtesy Lighting The courtesy lamps consist of the dome lamp and/or map lights. The courtesy lamps can be activated by the GEM using the panel dimmer switch, or by any ajar door. The courtesy lamps will shut off when the doors are closed and the illuminated entry feature is not active, or when the vehicle speed is greater than 8 kph (5 mph). The interior lamps will not be reactivated until the vehicle speed is less than 5 kph (3 mph) and a new door open warning lamp switch signal is received. The inputs are:

• ignition switch position

• driver door ajar switch

• front passenger door ajar switch

• rear left door ajar switch

• rear right door ajar switch

• vehicle speed switch (VSS)

The outputs are:

• battery saver relay

• interior lamp relay

Side Marker Lights for Jaguar XJ8 for sale ' eBay

www.ebay.ca > ... > Side Marker Lights for Jaguar XJ8

Results 1 - 48 of 822 - Get the best deal for Side Marker Lights for Jaguar XJ8 from the largest ... SIDE MARKER LIGHT LH 2003-2007 OEM DRIVER (Fits: Jaguar XJ8) ... Left Front Side Marker Light Amber LNC5031ABLH FREE Bulb Socket. Missing: 2006 ‎' Must include: 2006

Front Side Marker Lights for Jaguar XJ8 for sale ' eBay

www.ebay.ca > Front-Side-Marker-Lights-for-Jaguar-XJ8

Results 1 - 48 of 378 - Get the best deal for Front Side Marker Lights for Jaguar XJ8 from the ... 98-03 Jaguar X308 XJ8 Left Driver Side Fender Turn Signal Marker ... 2001 Jaguar XJ8 Right Front Side Marker Light Amber LNC5030ABRH FREE Bulb Socket ... 2006-2007 JAGUAR XJ8 XJ8L VANDEN PLAS LEFT RIGHT ...

Side Marker Lights for Jaguar XJ8 for sale ' eBay

www.ebay.com > ... > Side Marker Lights for Jaguar XJ8

Results 49 - 96 of 875 - Get the best deals on Side Marker Lights for Jaguar XJ8 when you shop ... 98-03 Jaguar XJ8 XJR Vanden Plas Front Left Driver Side Turn Marker Light OEM ... XJ8 Left Front Side Marker Light Amber LNC5031ABLH FREE Bulb Socket ... Shop by Year. 1998 · 2001 · 2005 · 2008 · 1999 · 2002 · 2006.

Side Marker Lights for Jaguar XJ8 for sale ' eBay

www.ebay.com > ... > Side Marker Lights for Jaguar XJ8

Results 97 - 144 of 873 - Get the best deals on Side Marker Lights for Jaguar XJ8 when ... 98-03 Jaguar X308 XJ8 XJR VDP Front Left Driver Side Turn Marker Light OEM (Fits: Jaguar XJ8) ... Standard Ignition S-816 Side Marker Light Connector (Fits: Jaguar XJ8) ... Shop by Year. 1998 · 2001 · 2005 · 2008 · 1999 · 2002 · 2006.

Jaguar Left Front Side Marker Lamp 2004-2006 XJ8, Marker ...

www.amazon.ca > Jaguar-Left-Front-Marker-2004-2006

Jaguar Left Front Side Marker Lamp 2004-2006 XJ8 in Marker Lights. ... Lamp comes with socket and bulb. > See more ... Jaguar OEM left (drivers) front side marker lamp for 2004-2006 XJ8 ... Reviewed in the United States on June 25, 2018.

Jaguar OEM Left Rear Side Marker Lamp 2004-2006 XJ8 ...

listen.dbcradio.net > Marker-Lights > 72422-20042006...

Side Marker Lamp 2004-2006 XJ8 Jaguar OEM Left Rear,Buy Jaguar OEM Left Rear Side ... Lamp Comes with Socket and Bulb . ... 1993-1997 Civic Del Sol Non VTEC Model DTA Front Driver and Passenger Side Premium CV Axles Fits ... D.B.S. Radio, as the station is popularly known, evolved from the Windward Islands ...

2004 JAGUAR XJ8 4.2L V8 Side Marker Light Bulb ' RockAuto

www.rockauto.com > catalog > jaguar,2004,xj8,4.2l+v...

Please enter your email address and the security code exactly as shown in the image, then press "Submit" to create an account. Please enter your email address ...

Jaguar XJ8 X350 corroded side marker fix - Aftermarket Garage

aftermarketgarage.com > jaguar-xj8-x350-corroded-sid...

Aug. 12, 2015 - I twisted out the socket in order to swap out the bulb but that wasn't happening. The bulbs are the kind the slide into the connectors so it should ... Missing: drivers ‎' Must include: drivers

Interior lights and the power door locks are controlled by a electronic control module . Hooking up a factory or some other type professional scan tool an checking for codes an viewing input data to these control modules would be the first thing to do.
The interior lighting system consists of the following:

• lighting control module (LCM)
• driver door module (DDM)
• instrument panel
• dome/map combination
• courtesy/reading lamps
• orientation light
• door lamps
• footwell lamps
• luggage compartment lamp
• glove compartment lamp
• vanity mirrors
• door ajar switches
• viewing wiring diagrams an checking power and ground circuits for these modules would be the next step if no codes were found . Principles of Operation
  Lighting Control Module This vehicle uses a lighting control module (LCM). The LCM is a microprocessor-based module that controls several vehicle subsystems, responds to electrical input signals from various switches, sensors, and external modules and is located on the LH side of the instrument panel. LCM subsystem functions include:
  
  • headlamps with autolamps
  • turn signal lamps/hazard flasher lamps
  • cornering lamps
  • parking lamps
  • daytime running lamps
  • interior lamps
  • demand lamps
  • battery saver
  The LCM interfaces with the driver door module (DDM) via the standard corporate protocol (SCP) network for the illuminated entry feature.
  The interior lamp is illuminated by pressing the individual interior lamp switch. The interior lamp is also illuminated by door ajar switches located in the door latches, when any door is opened. A theater lighting feature gradually increases or decreases the light intensity when switched by opening or closing a door.
  The dome/map lamp combination are located on each side of the interior lamp. The map lamps are operated independently of the interior lamp by two switches located on the interior lamps.
  The interior lamps are illuminated by holding the panel dim switch in the UP position until the dome lamps turn on. The interior lamp also illuminates when a door is opened and actuates the door ajar warning lamp switch in the door latch.
  The front map lamps are powered by the demand lighting circuit and the interior lighting circuit.
  The rear passenger reading lamps are incorporated into the rear seat assist handle and are located over the rear door openings. These lamps are illuminated through power supplied by the LCM demand lighting circuit.
  Interior lamps (controlled by the LCM) are activated by using the dome lamp switch (instant ON/OFF response) or when a door is ajar. The following lamps illuminate for interior lighting:
  
  • instrument panel interior lamps
  • front map lamps
  • rear reading lamps
  • door lamps
  Demand lighting includes lamps that are illuminated by the customer by directly actuating a switch. The front dome/map lamps are located in the overhead console. Each lamp is controlled by its own switch.
  The following demand lamps are powered by the demand lighting output of the LCM:
  
  • glove compartment lamp
  • vanity mirror lamp
  • luggage compartment lamp
  Each lamp has a dedicated switch that closes to ground to illuminate the lamp.
  The front map lamps are powered by either the demand lighting circuit or the interior lighting circuit, depending upon the position of the switch associated with each lamp. When the customer turns the front map lamp switch ON, the front map lamp is illuminated through power supplied by the LCM demand lighting circuit. If the customer moves the map lamp switch to the OFF position, the power from the LCM demand lighting circuit is interrupted and the lamp is reconnected to the interior lighting circuit.
  The rear reading lamps are powered by either the interior lighting circuit or the demand lighting circuit.
  The luggage compartment lamp is controlled by the trunk ajar switch, and is powered by the demand lighting output from the LCM, and is mounted near the center of the upper rear panel.
  The glove compartment lamp system consists of a glove compartment lamp switch and wire and miniature bulb assembly. Opening the glove compartment door closes the switch which provides power to the glove compartment lamp switch and wire. The glove compartment lamp switch is grounded to the body sheet metal.
  The vanity mirror lamp system consists of a switch and bulb assembly in the RH inside visor and the LH inside visor. Lifting the vanity mirror cover closes the vanity mirror lamp switch and provides power to the lamps.
  The illuminated entry system is controlled by the LCM and provides interior lighting upon entry to the vehicle.
  Interior lamps will be illuminated for 25 (±1) seconds which includes a theater lighting ramp-up time (0.5 seconds). This time interval does not include the theater lighting ramp-down time. Interior lamps will be turned off before the 25 (±1)-second timeout if the ignition switch is turned to the RUN or ACC position.
  The illuminated entry system has the following additions to accommodate the remote entry system: pressing the unlock button on the remote transmitter will activate the illuminated entry system (with theater ramp-up). When the driver door module detects a button press, it sends a signal on the J1850 communication network activating the interior lamps. The lighting control module will turn off the lamps by sensing the all doors lock signal.
  The battery saver feature prevents excessive drain from loads inadvertently left on. When the ignition switch is turned OFF, power is interrupted to the interior lamps and headlamps (after a 10-minute timeout) and the demand lamps (after a 30-minute timeout).
  The battery saver has the following inputs:
  
  • luggage compartment door ajar switch
  • dome lamp switch
  • ignition switch status
  • illuminated entry signal
  • headlamp switch
  • driver/passenger door ajar entry switch
  • keyless entry remote transmitter
  • door unlock, luggage compartment door release

The door switch doesn't go to the dome lights , the switch (door ajar switch ) is an input to the SMJ - smart junction box or body control module take your pick .
Principles of Operation
When the SJB detects a request for lighting, it turns on the interior lamps by supplying power to the lamps. The request for lighting can be an open door signal from a door ajar switch, an interior lighting on command from the instrument panel dimmer switch or an unlock command from a remote keyless entry (RKE) transmitter.
The door ajar switches are hard-wired directly to the SJB. The 2 door ajar switches are normally closed when the doors are closed. The decklid ajar switch is normally closed when the decklid is closed. All door ajar switches receive voltage from the SJB and each has its own ground circuit.
The instrument panel dimmer switch receives a ground signal from the SJB. The instrument panel dimmer switch provides variable resistance for backlighting the instrument cluster and a toggle ON/OFF function for the interior lights.
The RKE receiver is contained inside the SJB. When the SJB receives an unlock request from an RKE transmitter, it unlocks the doors and turns on the interior lamps. There could be DTC'S diagnostic trouble codes stored in the SJB ! You can not access these codes with a OBD2 code reader , need a factory scan tool .
B1319 Driver Door Ajar Circuit Failure Go To Pinpoint Test D . B1327 Passenger Door Ajar Circuit Failure Go To Pinpoint Test D . B2021 Dome Lamp Input Return Circuit Failure Go To Pinpoint Test A . B2550 Dome Lamp Output Circuit Short to Ground Go To Pinpoint Test A . B2554 Dome Lamp Output Circuit Failure Go To Pinpoint Test D . Do you know B-codes -body control .
Your best bet is to take to a ASE certified repair facility or a Ford dealer .

that sounds like the door latch assembly is faulty it does not use the same micro switch for door open signal has the interior light

Hello! The instigator of this problem appears to be the the rear cargo lamp; Official name is rear dome light. You'll need a multimeter set on the X10 ohm scale to shoot this trouble. Leave the rear dome light bulb out. There are two switches involved; #1 the rear dome light on/off. #2 the right hand front door switch.

Pull the horn fuse out, remove the rear dome light cover, drop the rear dome light down to access the wiring and close all doors on the vehicle. Connect one lead of the ohm meter to the white wire and the other to body ground. If you read any resistance one or both of the two switches (dome light switch or right hand front door switch) is remaining closed when all doors are closed. Next disconnect the black lead from the dome light switch and see if reading changes to zero. If it does this is indicating that the dome light switch is defective. If it does not, disconnect the right hand door switch and take another reading at the same location. If you still measure any resistance, the black wire of the rear dome light is shorted to ground, if not then the right hand door switch is the culprit.

The reason the right hand door switch and not the left hand door switch is involved is the fact that opening the left front door would turn on the front dome light as well as the rear light. If both dome lights are staying on with all doors closed I would then involve both door switches in this test procedure. If your vehicle is a four door model then disconnect one door switch at a time while performing this test procedure.

The horn fuse also supplies power to the rear dome light, and I suspect the two events are related.


Guru..............saailer


I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

The interior lamps system consists of 2 main features. Illuminated entry and a battery saver feature that will turn the interior lights off after 20 minutes if they are left On with all doors closed and the ignition Off. The body control module (BCM) controls both of these functions. Battery power is supplied by the BCM through CKT 1732 to the following lamps:
• The dome lamp
• The map lamps
• The rear reading lamps
• The rear dome lamp
• The cargo lamp
• The glove compartment lamp
• The courtesy lamps
• The sunshade lamps
The BCM also controls the ground circuit side of the dome lamp and reading lamps for illuminated entry. The dome lamp and reading lamp will remain on for 20 seconds after the ignition key is removed and the last door is closed. In addition, if the vehicle is equipped with remote keyless entry (RKE), the dome and reading lamps will turn On and stay on for 20 seconds after an UNLOCK signal is received from the keyless entry transmitter.
The reading lamps, dome lamp and map lamps can be turned On at any time by moving the appropriate switch to the On position.
The rear dome lamp is fed battery voltage through CKT 1732 from the BCM, through the liftgate ajar switch, and is grounded through CKT 650 to the rear ground splice pack. The rear dome lamp will turn on when the liftgate is opened. The cargo lamp is fed battery voltage through CKT 1732 from the BCM, through CKT 744 and grounded through the decklid ajar switch.
The courtesy lamps are fed battery power through CKT 1732 and are grounded through CKT 745-- left front, CKT 747--left rear, CKT 748--right rear, CKT 746--right front. These circuits will ground through the door jamb switches. The courtesy lamp will be illuminated when the affected door is opened. For example, when the right rear door is opened, the right rear door courtesy lamp will turn on.

Not a fuse problem , if the BCM had blown fuse other thing's wouldn't be working as well . . Probably wiring or BCM . Using factory diagnostic,s instead of guessing as to what the problem is , is the proper way .

Interior Lamps Diagnosis
Symptom
Procedure
Important: Before proceeding with these diagnostics, check for DTCs. If DTCs are present, complete the associated diagnostics. If the condition still exists, return to this chart.
All of the interior lamps are inoperative when any door is opened.
Chart 1
The dome lamp is inoperative in the ON position, but OK in the door position. The map lamps operate normally.
The dome lamp switch is faulty. Replace the dome lamp switch.
The dome lamp is inoperative in the DOOR position, but is OK in the ON position.
Chart 2
The dome lamp is inoperative in any position and both reading lamps are inoperative.
Disconnect the dome lamp connector (BLK 3-way).
Check for voltage at terminal "C" CKT 1732 ORN wire.
If OK, the dome/map lamp is faulty. If no voltage is present, there is an OPEN in CKT 1732.
Either the right or the left sunshade mirror lamp is inoperative.
Chart 3
Either the right or the left rear reading lamp is inoperative in the ON or the DOOR position.
Chart 4
The rear reading lamp is inoperative in the ON or the DOOR position.
Chart 5
Battery rundown protection is shorted to ground - B1482.
B1482
The left rear reading lamp is inoperative in the ON or the DOOR position.
Chart 6

take off the cover and replace them. if you have a volt/ohm meter you can put if on the car side and make sure you have voltage and the ohm meter on the buldb should give a 1 rating if its good. it would be the cheapest and easiest to just get a new bulb and see if it works then start checking fuses if its not the bulb.

If it has automatic or a domelight that stays on for a while after you shut the door is on a timer relay and that is probably getting bad. As far as the door ajar message there is a switch in the door jam, look and see if you see it. Take wd40 and try to soak the switch try to get it inside the switch.If its incorporated in the door latch spray back inside the door latch real good. Open and close the door several times and see if it works then.