1994 Lexus LS 400 Logo

Related Topics:

Posted on Apr 21, 2009

LEXUS LS 400 STEERING DOESNT GO DOWN

I have 1994 lexus ls 400 the steering wheel go up a little but it will not come down it makes a grinding noise

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jul 29, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jul 29, 2009
Answers
1
Questions
0
Helped
483
Points
2

I had the same problem and took the steering wheel apart on the left side where the lift motor is. There is a plastic gear that controls your lift that is stripped out. I went to the dealership and they wanted $500 for the assembly, they wouldn't sell just the gear. I went home and after I thought about it a while came up with the idea to turn the gear around backwards since the teeth on that side were in good shape. I put it back together and it has worked great ever since. This should work for you with very little effort. I do now however do not hold or apply alot of pressure to the wheel when it is lifting as this is what causes this problem in the first place. Hope this helps you. Todd

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I recently just changed the rack and Pinion in my 1992 Lexus LS 400 do to hard spots in the steering. Now my steering extremely stiff. I'm wondering if it has to do with the solenoid that mounts to the...

the steering lines fittings are different sizes it could be the sensor however make sure all the air is bleed out of the system first. to do this with the engine running turn the steering wheel full left and full right until you hear no noise then check the steering fluid level and repeat as needed.
0helpful
1answer

Does the 1994 LS 400 use something other than power steering oil?

if it is for the power steering system or the hydraulic cooling fan then you only need power steering fluid.
2helpful
2answers

Changed power steering pump for lexus 1999 gs400 and it still doesnt work with the power steering I did purchase a used oem rack and pinion as well had the used parts both installed and it still is not...

you need to bleed the rack. you can try to turn the steering wheel to the left and hold for 5 sec and then to the right and hold, continue this a few times check fluid and repeat. you can also try to loosen line on rack and turn wheel to bleed air out then tighten before turning wheel again.
0helpful
1answer

Noise when turning on Lexus LS 400 1994

I think you are talking about a cv shaft. Does this sound only come when you turn the steering wheel far one way and in motion. If so they it is most likely a cv shaft. The cv shaft usually runs about $50-75 and labor will probably be another $75.
0helpful
2answers

Telescopic Steering wheel won't move down or up

Yes it would be perfectly ok to disegauge the auto switch to keep it from moving again. It needs a tilt motor replaced . not a easy job.
1helpful
1answer
12helpful
2answers

Telescopic Steering wheel won't move down - I hear a gear spinning

Open the gear motor on the left hand side of the telelscopic assembly. Take the plate off held by 4 philips screws. Using a 10mm socket, remove the bolt holding the platic gear. Remove plastic gear and insert the reverse way. Over the years, one side of the gears get worn out.
2helpful
2answers

Power steering

There is a loud squeak on the front of my 1991 ls 400. The squeak is near the alternator. Any one no what it is?
Not finding what you are looking for?

493 views

Ask a Question

Usually answered in minutes!

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...