I took my 1998 Isuzu Rodeo to a repair shop to get the transmission replaced and the mechanics "accidently" some how broke my green wire on my neutral safety switch (they never told me it was broken. I took my Rodeo to another mechanic and he showed me the wire) anyway, I'm just trying to find out what this wire is and what purpose it serves.

Mike

• 3 Answers
• Posted on Jul 07, 2008

SOURCE: 2000 Isuzu Rodeo Check Engine Light

After you change the gas cap like everybody tells you. The transmission position micro switch on the floorboard.

SOURCE: Check engine light-isuzu rodeo

Gas cap isn't on right. Remove and retighten. Turn it at least 5 times.

SOURCE: 2002 isuzu rodeo won't start

Good day;
the clutch switch is located on the clutch pedal support, if you put your hand on the clutch pedal run your hand up and the switch will be at the top. now if you are going to replace this switch I would try to adjust the switch first the amount of time it takes and this would confirm that it's the switch. ensure clutch pedal is fully returned, disconnect the electrical connector from the switch. loosen lock nut and tighten clutch switch by hand until switch is firmly against clutch lever. back the switch out 1/2 turn, the switch plunger should extend .02-.06" (.5-1.5 mm).
hope this helps

Cheers