It can be the loose ECM connector.The connector needs to be inspected.Try cleaning the connector connections and the port when the connector is inserted.
----------
This is common problem faced by many others too.For troubleshooting solutions click the link below:--
http://www.gresk.com/2013/09/dodge-ram-ecm-connector-no-start.html
-------
Thanks.
The board has a dry joint on the cable connector. it will need to be resoled back on. this is the ECU computer you are meaning. you will need to open the ecu up to repair it.
NO HEAT ON FLOOR VENTS
---------
As
per your problem mentioned. There are few solved help links to
troubleshoot these problems. Go through the list and Click the link below:----
http://whatisbyme.blogspot.in/2012/05/2000-toyota-avalon-no-heat-on-passenger.html
------------
------------
http://schematicsdiagram.blogspot.in/2012/02/heater-blows-cold.html
-----------
http://repairhelpcenter.blogspot.com/2012/01/hot-air-on-drivers-side-vents-only.html
--------------
-----------
http://technoanswers.blogspot.in/2012/04/1992-toyota-camry-ac-control-light.html
--------------
http://technoanswers.blogspot.in/2012/02/no-heatblower-blows-only-cold.html
----------
-------------
http://whoisbyme.blogspot.in/2012/06/2009-mercury-grand-marquis-ac-blows.html
-----------
http://schematicsdiagram.blogspot.in/2012/04/ac-not-blowing-through-vents-on-2007.html
----------
http://schematicsdiagram.blogspot.in/2012/04/passenger-side-temperature-is-warm-air.html
----------
These
will help.
Thanks.
92 views
Usually answered in minutes!
×