SOURCE: driver side mirror
If you are talking about the mirror assembly,you have to remove the door panel to replace the mirror. The mirror is held on by 11mm nuts.
SOURCE: 1997 F-350 Ford Powerstroke4x4 Crew
Have you changed your oil? Rotella 15W-40. These engines really don't like old oil. It becomes too thick for the injection pump to work correctly. Another possibility is a bad cam sensor on the front of the motor. Most engines call this the crank sensor but on this engine you have to look it up as a cam sensor.
SOURCE: Ford 350 diesel truck batteries draining.
ALL FORDS DO THIS/ JUST RUN IT FOR 15 MIN ONCE A WEEK OR TRADE IT IN FOR A DODGE
SOURCE: how do i remove rear seat in 2004 ford f-150
1st time might take a bit ( I spent ~ 40 min total, taking pictures )
This is from the service manual :
Picture showing where the steps are at :
These are from removing my rear seat in my '06
This is the angle you are shooting for through the opening 
Once you have the seat back out, zip tie the clips back, so it can be removed easier the next time
THis is the paddle that you are releasing with the screw driver, and what you would zip tie back
To raise the seat, if you do not have something planned, might want to look at the LMI welding seat riser set. Nice solid metal brackets pick the rear seat bottom up 2.5" and brings the front forward a bit ( make passenger comfort nicer in my opinion with a deeper & taller seat ).
http://www.lmiwelding.com/kits_supercab.htm
60 views
Usually answered in minutes!
×