1999 Chevrolet Silverado 1500 Logo
Posted on Apr 19, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Program fob need to prgran a fob for my 1999 chevy silverado

Answer This Question

2 Answers

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.
Governor:

An expert whose answer got voted for 20 times.

  • Expert 135 Answers
  • Posted on Apr 20, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.
Governor:

An expert whose answer got voted for 20 times.

Joined: Apr 19, 2009
Answers
135
Questions
0
Helped
133670
Points
492

Instructions to program a keyless entry remote for a Chevy Silverado. They also work on 2003, 2004 and 2006 Suburbans.

  1. Close all the vehicle doors.
  2. Insert the ignition key into the ignition lock cylinder.
  3. Press and hold the DOOR unlock switch.
  4. While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
  5. Release the DOOR unlock switch. The doors will lock and unlock to confirm the program mode.
  6. Press and hold the LOCK button and the UNLOCK button simultaneously on one keyless remote. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
  7. Repeat the previous step to program up to four transmitters.
  8. Turn the ignition switch to the RUN (one more click forward) position in order to exit the keyless entry transmitter mode.
  9. Operate the transmitter functions in order to verify correct system operation

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on May 28, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: May 28, 2009
Answers
1
Questions
0
Helped
1478
Points
1

Instructions for keyless entry remote programming on 92 fullsize blazer?

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

How to program fob for 2011 chevy malibu
google how to program fob for 2011 chevy malibu for more info

On the Chevy key fob, press and hold the "Unlock" and "Lock" buttons at the same time until you hear the door lock and unlock again. This means you're all set. Re-insert the programmed key back into the ignition to the "On" position to finish the Chevy key fob programming process
Read full answer
Dec 13, 2023 • Cars & Trucks
0helpful
1answer

2004 Chevy Silverado Key Fob will NOT unlock doors but WILL lock doors.
Question edited to add maker.
Question moved to model category.

Sounds like you have an Amazon Lemon, made in China. Find a local auto locksmith. They have a pro grade scan tool computer to check the vehicle systems and also a gadget they can test the transmitter in the fob for its functions.

https://www.google.com/search?q=local+auto+locksmith

..
Read full answer
Jan 12, 2023 • 2004 Chevrolet Silverado
0helpful
1answer

Key fob dont work, but door lock works ok, key fob battery change.
1. Get in your vehicle.
2. Close the door.
3. Put key in ignition
4. Do not turn on the ignition yet.
5. Hold down on the unlock button on the door panel. Do not let up.
6. Turn the key to ON, OFF, ON, OFF (while still holding the unlock button on the door panel).
7. Release the unlock button.
8. The door locks should cycle, indicating that you did everything correctly.
9. Have all your remote entry fobs available. Hold down on both the lock and unlock buttons until the door locks cycle. Do the same on all key fobs. This will re-program all of them.
10. Turn ON the ignition key to exit the program mode.
11. DONE.
Read full answer
Apr 18, 2014 • 1999 Chevrolet Silverado 1500
0helpful
1answer

Got new key fob for my 2006 chevy malibu ss how do I program it to work

How to Program a Key FOB for the Chevy ' eHow.com

www.ehow.com/how_7508133_program-key-fob-chevy.html

How to Program a Key FOB for the Chevy ... your Chevy, if you obtain new or replacement keys they will need programming to work with ... How Do I Program MyKey Fob? ...

Read full answer
Mar 14, 2013 • Cars & Trucks
0helpful
1answer

Purchase a used 2000 chewy silverado pickup it came with replacement key it seems to have a key less entry system it also might have a factory alarm q my question how can i get a key fob to match...
you most likely will have to go to your local chevy dealer to purchase the fob and have them program it.
Read full answer
Aug 21, 2011 • 2000 Chevrolet Silverado 1500
0helpful
1answer

Ingnition problems for 1999 chevy silverado wont start wont crack over when you turn the key on but you have dash lights when your trying this
maybe not strong enough battery or try shifter moving while you try to start.. may be neutral safety switch so try jiggling the shifter in park and neutral. also the key may need to be cleaned the fobs get dirty where it wont read it, got a spare try it....
Read full answer
Dec 10, 2010 • 1999 Chevrolet K1500
0helpful
1answer

1999 Chevy silverado z71trying to program a new key fob
Use this procedure for New Body Style.
1. Close all doors
2. Insert key into ignition
3. Hold down the power UNLOCK button on the driver's door panel, continue to hold down
until instructed to release in step 9.
4. Perform steps 5 through 8 in a fairly rapid succession.
5. Turn the ignition to the ON position (as far as you can go without starting the engine.)
6. Turn the ignition to the OFF position.
7. Turn the ignition to the ON position (as far as you can go without starting the engine.)
8. Turn the ignition to the OFF position.
9. Release the power UNLOCK button on the door panel. The vehicle should respond by
door locks locking and unlocking automatically. (If locks do not cycle after you let go,
not before you let go of the unlock button, then the vehicle has not entered programming
mode and you must start procedure over. Remove key from ignition, open drivers door
and return to step 1 ). If the locks do cycle automatically then proceed to step 10.
10. Hold down the LOCK and UNLOCK buttons on the remote until the doors lock and
unlock. This may take up to 30 seconds.
11. Repeat step 10 NOW for each additional remote. (Including any existing remotes).
12. Turn the ignition to the ON position to exit the programming mode.
13. Test remote(s).
Read full answer
Apr 29, 2010 • 1999 Chevrolet Silverado 1500
2helpful
2answers

Programming a new remote control door lock transmitter for my 2000 chevy Silverado
Hold down the unlock button on the door and while holding it down cycle the key on and off 3 times within 5 seconds and let off on the unlock button.The door locks will cycle to lock and unlock.After they cycle press the lock and unlock buttons on the fob til the door locks cycle.I f you have another fob push the lock and unlock on this one to program it.If you program one and not the other at the same time, only the one you programmed will work.Even if the other one worked before.Anytime you program a fob you have to program all the fobs you have.You can program up to 4 fobs.To get out of program mode just turn the key on and you will exit program mode.Check and make sure they work when your done after you exit program mode.Hope this helps.Good luck.
Read full answer
Mar 18, 2010 • 2000 Chevrolet Silverado
5helpful
1answer

Programming instructions for a 1999 Chrysler 300M remote fob
Manual Programming Procedure (non scan tool)
1. Connect pin 1 of the 16-way data link connector to chassis ground or to pin 4 of the 16-way data link connector.
2. Close all doors, turn ignition key to off.
3. Turn ignition key to Accessory.
4. Turn ignition to off, door locks will cycle once (in programming mode).
5. For each key FOB, press any button 3 times in a row to program code. When programming is complete, the door locks will cycle once.

NOTE:
IF A SECOND KEY FOB REQUIRES PROGRAMMING, IT MUST BE PROGRAMMED WITHIN 1 MINUTE OF PROGRAMMING
THE FIRST FOB PROGRAMMING. PRESS ANY BUTTON ON THE SECOND FOB 3 TIMES TO PROGRAM ITS CODE. WHEN PROGRAMMING IS COMPLETE, THE DOOR LOCKS WILL CYCLE ONCE.

6. The programming mode finishes after the following:
a. Programming of two key FOBS is completed.
b. One minute has passed since programming.
c. Pin 1 of 16-way data link connector is removed from ground connection.
d. Ignition switch is turned on.
e. Any of the doors are opened.
Read full answer
Apr 09, 2009 • 1999 Chrysler 300M
Not finding what you are looking for?

View Most Popular

1999 Silverado 1500

  • Cars & Trucks

Related Question

How to program fob for 2011 chevy malibu

  • Cars & Trucks

Related Topics

1,488 views

Ask a Question

Usually answered in minutes!

Popular Questions

00 Chevy Silverado... ABS EBCM diagram help??? Brake line hookups

2000 Chevrolet Silverado 1500

Front Hub Bearing Torque specs to complete replacement

2003 Chevrolet Silverado 1500

Electric Radiator Fan Does Not Come On

2007 Chevrolet Silverado 1500 2WD

Where is fuel pump relay for 2003 chevy silverado

1999 Chevrolet Silverado 1500

Windshield wipers will not turn off - 2003 Chevrolet Silverado

2003 Chevrolet Silverado 1500

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
2010_chevrolet_silverado_owners.pdf....

1999 Silverado 1500

PDF Manual
2010_chevrolet_silverado_owners...

1999 Silverado 1500

Loading...