At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are rumors that there are "hidden" features accessible by the dealer. If this is something you dont want, contact your local dealer and ask if that is something they can turn off.
SMART ENTRANCE CONTROL UNIT PFP:28596 Description EKS003A2 OUTLINE The smart entrance control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger and door mirror defogger ? Power door locks ? Remote keyless entry system ? Vehicle security system ? Interior lamp ? Battery saver control BATTERY SAVER CONTROL Interior Lamp/Map Lamp/Vanity Lamps The lamps turn off automatically when the interior lamp, map lamp or/and vanity lamps are illuminated with the ignition key in the OFF position, if the lamp remains lit by the door switch open signal or if the lamp switch is in the ON position for approximately 10 minutes. After lamps are turned off by the battery saver system, the lamps illuminate again when: ? Driver's door is locked or unlocked, ? Door is opened or closed, ? Key is inserted into or removed from the ignition key cylinder. Rear Window Defogger/Door Mirror Defogger Rear window defogger and door mirror defogger are turned off approximately 15 minutes after the rear window defogger switch is turned on.
Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in smart entrance control unit)
Does it have power locks ?
TIME CONTROL UNIT PFP:28491 Description (Without Power Door Locks) EKS003A6 OUTLINE The time control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger INPUT/OUTPUT System Input Output Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in time control unit) Rear window defogger Ignition switch (ON) Rear window defogger switch Rear window defogger relay
Depress lock or unlock button. Manually lock and unlock driver's door within 30 seconds. System should now lock or unlock vehicle. If not, carry out programming procedure. Programming When Key added or replaced. System malfunction: Alarm LED in rear fog lamp switch illuminates for 30 seconds when vehicle is locked. How NOTE: A maximum of 4 keys can be programmed (one at a time). As memory positions of existing keys are unlikely to be known: Obtain and reprogram all keys. NOTE: Existing key memory positions will be overwritten. Switch ignition ON. Use key not fitted with remote control. Manually lock vehicle using key. Using first key, press unlock button once (programs memory position 1). Alarm horn sounds once to indicate signal received. Wait 6 seconds. Press unlock button once to confirm programming. Vehicle unlocks. Programming mode deactivated. Switch ignition OFF. To program remaining keys into memory positions 2, 3 and 4. Carry out the complete procedure below for each key: Switch ignition ON. Use key not fitted with remote control. Manually lock vehicle using key. Press unlock button at 1 second intervals, as follows: Twice for memory position 2 (second key). Three times for memory position 3 (third key). Four times for memory position 4 (fourth key). Alarm horn sounds once every time unlock button is pressed, to indicate signal received. Wait 6 seconds. Press unlock button once to confirm programming. Vehicle unlocks. Programming mode deactivated. Switch ignition OFF. NOTE: Ignition MUST be switched OFF between each key programming procedure
On 2002 model try the following:
1.Close all vehicle doors.
2.Insert the key into the ignition. 3.Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9. 4.Perform steps 5 through 8 in fairly rapid succession. 5.Turn the ignition switch to the ON position (as far as you can go without starting the engine). 6.Turn the ignition switch to the OFF position. 7.Turn the ignition switch to the ON position. 8.Turn the ignition switch to the OFF position. 9.Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically. 10.Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds. 11.Repeat step 10 NOW for each additional transmitter (including any existing transmitters). 12.Turn the ignition switch to the ON position in order to exit the transmitter programming mode.
try putting key in ignition turn to on position
then press lock & unlock several times slowly if door locks cycle up & down after 1st press it lost code and is now resynconised.
now try remote with all doors closed and key out of ignition
if this dont work need to register key(program)back into system which dealer must do with Tech2 if round heart shapped remote
have tilt wheel? try unlocking tilt and moving it as you try to turn key..replace key and/or ignition switch if that doesnt work..if it does ..the linkage is damaged in steering column to switch at base
the steering wheel SHOULD be locked if the key is not in the ignition and turned to the 1st position. If you can turn the steering wheel more than an inch or so without the key n the first position, the ignition switch (read: thingy you put the key in) is bad.
Sometimes you may have to move the steering wheel slightly to one side or the other to get the key to turn, this in itself is not a cause for alarm. Try it and let us know. If this doesn't work, you are probably looking at a couple hundred dollars parts and labor to get the switch/steering wheel lock mechanism fixed.
Please rate all solutions.
×