You will need to remove the parking brake cable from the caliper then remove the lower slide pin bolt, flip the caliper up and pull out the old pads and install the new ones. You should get the rotors machined for the best braking performance or replace them.
SOURCE: How do I R&R front motor mounts on 2000 cadillac sts
Very easy, just remove front tires and unbolt, BUT I doubt you are asking right question. Not mounts, but mount in dead front center is problem. There are 4 mounts, transmission center back, left center and right center and front center. That takes full torque of motor and heat from exhaust. GM has a shield for exhaust.
SOURCE: How do you change the brake light on a 2000
Open the trunk and locate the screw that hold the lense assembly, remove screws, turn the socket that holds the brake bulb which will releas the socket, pull out the bulb, and replace with new bulb, reinstall in reverse order.
1,309 views
Usually answered in minutes!
×