B67875877 pairing code - 2006 Mercedes-Benz CLS-Class

To pair a Samsung remote model AK5900104R2A with a Philips DVD player model 714821 2001, you will need to first locate the Philips DVD player's remote code. You can find this code in the instruction manual, or by contacting Philips customer service. Once you have the code, press the "Setup" button on the Samsung remote and enter the Philips DVD player's remote code. If the code is accepted, the Samsung remote should now be paired with the Philips DVD player.

Hi
Normally when you try and connect or pair your device it normally ask for code. mostly its 0000 or 1234

thanks

enable blue tooth on phone and wait while it searches...the infotainment center will show you a code on the screen...type in the code the car gives you into your phone..wait for the code... then pairing will be successful..

Bluetooth pairing with a vehicle and a cell phone will depend upon the phone type. Either the phone of the vehicle will tell you the code needed when pairing is in process. Many times, pairing doesn't require a code, especially if the phone is a "feature" phone and not a "smart" phone.

Try this link. It's for an Altima but the code is probably good for all models

http://www.ehow.com/how_7318651_enable-bluetooth-2007-nissan-altima.html

Did you try just pressing enter (no code)? If not, try "0000" I found something here: http://fordfcsd.wunderman.be/UK/Audio%20-%20Multimedia%20-%20Navigation/Bluetooth%20%26%20Voice%20control/bluetooth%20%26%20voice%20control%20%28cg3504en%29%2001-2006.pdf which indicates "0000" is the code, but enter should do it

If I remember rightly doesn't the Jaguar system give you a code you have to type into your BB? I run an earlier model than yours, but when I get a loaner, I seem to remember that you have to do this. So, go to pairing mode, get the code and tap that into the BB when it asks for the code. I have had no problem pairing my BB with any of the new Jags from X type, S type and XJ.

According to the manual, do this:

1. Park the car
2. Press the Speech button
3. Say "Setup"
4. Say "Pairing Options"
5. Say "Pair a phone" when prompted
6. It will ask for a 4 digit pin -- tell it one (this is the pin you will use on the phone as well)
7. Confirm the pin number if it asks
8. start doing your pairing process on the phone, using the number you said in the step above
9. Once it's paired from the phone, the car will ask to name the phone.
10. Then the car will ask for connection priority, from 1 to 7, in case there is more than one paired phone in range -- it will connect to phone with the lowest number
11. It may confirm your phone's name and priority, then it should tell you the pairing is complete.
    

I am looking for the procedure to do this, i am sure the pairing code is 0000.
I will look today and get back to you.
Thanks

When u want to pair your bluetooth phone the first time, you must do this in the first 30 seconds after ingnition. This is the only period your audi bluetooth carkit is in search mode. Follow these steps to make it work:

Put your bluetooth phone in search mode, then start your car. Your phone will now detect something like AUDI UHV-1 or similar. Connect to this device, and enter either code 1234 or else code 0000. Your phone will then connect. Command your phone to keep the Audi device listed as a save connection, which can automatically connect. The next time you enter your car it will connect by itself (after ignition that is).