Depending on what make car it is. Remove the trim panel so that the trunk lock is exposed check where the release was connected look for a reset or put the key in the trunk lock unlock it then close the trunk lid
Gabriel
SOURCE: 86 camaro trunk pull down motor
buy a replacement unit from the junk yard or from ebay. or do as i did and make the uint into a manual open only. vist thirdgen.org and look in the tech articles for the best help
SOURCE: 2005 mercedes e320 cdi both keys locked in trunk how to open????
Had the same problem and had to cut a hole in behind the rear centre arm rest to retrieve both sets of keys. I cleaned up the area and made it into a ski hatch or for passing fishing rods thro. MERKYS320
SOURCE: diagram for volvo trunk lock
My son was missing with the valet parking key while I was driving. When we got home and tried to open the trunk it wouldn't. It also made this buzzing sound when I push on the trunk latch.
SOURCE: how to replace pull down trunk 1995 Cadillac Deville
The trunk lid pull-down assembly switch, part number 16629927, most likely needs to be replaced. The switch is mounted on top of the trunk lid pull-down assembly motor at the bottom of the trunk. The switch costs about $43. It's easy to replace. Just unplug the electrical connector, remove one Torax-head screw, and pull up on the switch while wiggling it.
To verify that the trunk lid pull-down assembly switch (which is actually a combination of three enclosed ganged striker switches and one lid ajar switch) needs replacing, connect a test lamp or voltmeter between the orange and black wires on the electrical connector. If the lamp lights or the voltmeter shows about 12VDC, then either the connector needs cleaning or the pull-down assembly switch is bad. If the lamp doesn't light or the voltmeter reading is zero, trunk compartment fuse D7 is open, or a wire is open or shorted to ground.
214 views
Usually answered in minutes!
×