You can find the intake air temp sensor on those engines at the right front of the intake manifold just behind the alternator. It goes into the manifold at an angle and should be in plain sight.
SOURCE: i cant find the IAT sensor on my 98 ford explorer XLT v 6 SOHC
Try “autozone.com” or your local library for diagrams and step by step instructions.
SOURCE: iat sensor
Hi there ... The IAT sensor is on the intake manifold, just behind the alternator. For further info on this sensor you can go to www.autozone.com. click on repair info,select your vehicle. then click on vehicle repair guides. In the product search box at the top left type in IAT and then click on the repair guide in the box that appears and it will give you more info.
Hope this helps you out
SOURCE: where is the iat sensor on my 2005 dodge ram 2500
Hi there:
If your truck has a 3.7L or a 4.7L engine it is on the right side of the air box just on the engine end of the flexable rubber boot that extends from the right fender. If it is a SRT it is located in the rubber boot that extends from the front of the truck on the left hand side of the boot just before it connects to the engine.
Hope this helps
Farrout!
SOURCE: I am looking for the I.A.T. Sensor location on my truck
If your looking for the Intake Air Temp/Manifold Absolute Pressure sensor (IAT/MAP)(2003 model year and up) It is on the top of the intake manifold, just to the left of the #3 injector fuel line. There are 2 small Torx screws holding it.
SOURCE: were is the IAT sensor located on my 1999 dodge
This should be the only sensor located on the Air Filter casing/intake. It measures the Intake Ambient Air Temperature and sends that information to the PCM/IPM to gauge the correct Air and Fuel mixture to have the Engine start and run.
1 - LEFT SIDE OF THROTTLE BODY
2 - ELEC. CONNECT.
3 - IAT SENSOR
4 - RELEASE TAB
1,931 views
Usually answered in minutes!
thank you very much z
×