Replaced fuel pump and sending unit assembly in tank and can,t get van to start.checked wires and fuel pump relay still nothing.
Replaced fuel pump and inline filter and still wont start
Can you jumper the relay or find the red wire by the battery that is nit connected it will have a green connector jump it to positive and see if pump comes on
I have found that more often than not, the problem lies in the electrical connector that goes through the floor of the van right behind the driver's seat.
It's exposed to all sorts of **** that can short it out.
You can try to clean-up the connections or cut off the plug and connect each wire directly using ****-end connectors.
×
775 views
Usually answered in minutes!
pontiac montana won't start changed fuel pump relay and fuel filter
×