Get it fixed or replaced NOW!! A loose seat is VERY dangerous!!!
For the amount of hassle this might cause replacement is your better option, but expensive. To fix this you will possibly have to strip the upholstery and padding from the entire seat.
You might be able to get a used set from a vehicle breakers yard or one of the Mustang owners clubs.
SOURCE: front seat stays in the reclined postion..
The seat position is changed through the use of a cable that runs through a flexible tunnel, under the seat. In one case that I'm aware of, this cable got stuck around a projecting seat spring under the seat. When the seat was reclined and moved backward or forward, the cable caught on the seat spring and the seat had insufficient slack in the cable to release from the reclined position.
SOURCE: I have a 1994 Ford Mustang, but I can't get the
Ive got a 94 mustang and had the same problem... check in the engine where the fuse box is. My problem was the fuse was blown out so it was a quick fix. but if thats the case replacing the fuse is only halfway fixing it because you have to find out what caused it to blow. chances are its a bad ground wire because thats what mine was. as far as the manual release switch i couldnt say on that one because i dont know
SOURCE: the reclining lever for my has broke off cant
well lets not start with visegips .
the lever needs to be removed by removing the screw and removing the lever.
go to the dealer to get the new lever and put it on.
SOURCE: Ford Mustang '95 Electric Seat
you have to replace the seat frame rail asy. It comes with new motors. I would check the switches for proper power & operation anyway, but having owned & repaired this myself , I am sure you need the whole assembly. P.S. this is a somewhat involved replacement. remove the seat, remove the rail/motor assembly & replace. reinstall to seat then to car
285 views
Usually answered in minutes!
×