Question about 2000 Land Rover Discovery

Open Question

Disco 2 2000 wont start or turn over M and S lights flashing and bell bleeps 4 times

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Renault clio fault finder


This may help show if you have a problem - it may even reset the light. With your ignition off, press in the button on the end of your wiper stalk(rt of steering wheel), still holding it pressed in, turn your ignition key but do not start the engine. All the dash lights should come on, a bleep/bell will sound every second, and your speed and revs dials will jump to different places in time with the sound. Press the stalk button once and the amount of fuel should be indicated in the mileage display area eg 25 L. Press it a second time and it will change - I don't know what this is but mine reads 0.0, a third time could be interesting as this indicates where you might have a fault - in one of 4 areas - . If no problem detected then simply four dashes viz - - - -, you might have - - E - for electrical; press it again and you go back to the amount of fuel. Lastly, if you press the mileage select button, this resets (I believe) the fault codes and might also reset your lamp. Everything goes back to normal. Now start your engine and see if the red light is there - turn it off again and repeat the procedure to see if anything has changed. Good luck!

Jun 05, 2014 | 2002 Renault Clio

2 Answers

Seat belt light flashing when ignition turned on


A bad seat belt switch inside the buckle, try some tuner cleaner from best buy or radio shack

Nov 25, 2013 | 2011 Ford Focus

1 Answer

Sharan wont start clicking behind dash


It sounds like the battery has failed from the description your wife gave you.

Oct 18, 2012 | Cars & Trucks

1 Answer

Automatic lights wont switch on


From manual:
Automatic operation
With the engine running, vehicles fitted with a light sensor, the dipped beam headlights light up automatically as light begins to
fade; stalk 1 does not need to be turned (position 0).
To deactivate or reactivate this function, move the end of stalk 1 twice consecutively from 0 to side light position, with the engine stopped and the ignition on.
A bleep confirms the deactivation of this function, and two bleeps confirm its reactivation.

Jun 20, 2009 | 1986 Renault Sport

1 Answer

99 Disco 2 Dash lights M and S Flashing


It thinks you're kinky ;)

Seriously though, it suggests a problem with the Automatic Gear box ECU, or X/Y selector switch. Can also be water in the connector as it joins the gearbox, or someone's knocked the ECU which is under the passenger seat (RHD).
Sometimes this can be cleared by stopping, turning off the ignition, and starting again and it's fine. It's alerting you that it is in 'Limp Home' mode (3)

Apr 07, 2009 | 1999 Land Rover Discovery

1 Answer

Ekc on land rover disco 2 v8


Well, you may not need to take it to a dealer if you have the EKA code.
Firstly, pop a new battery in the fob. Get the vehicles battery charged up or changed.
Now we can enter the EKA.
Close all the doors.
Turn the key in the driver door lock to the unlock position and hold there for at least 5 seconds until the alarm sounds once. Then return to centre - always ensure you return to centre and do not delay more than 10 seconds between turns, or hold in the position for more than 5 seconds or you will reset to the start. Turn to full extent of travel.
1st Digit turn to unlock the number of times specified.
2nd Digit turn to lock the number of times specified.
3rd Digit turn to unlock the number of times specified.
4th Digit turn to lock the number of times specified.
Finally turn to unlock once more. If it is correct a double bleep will sound (single bleep is incorrect code)
You now have a 5 minute delay - don't open any doors. The anti-theft indicator will continue flashing once every 2 seconds for the five minute period. When this goes out, open the door and start within 30secs.
After 3 failed attempts, the security system invokes a delay period of 10 mins during which the system will not accept any further attempts to enter a code.

Mar 02, 2009 | 2003 Land Rover Discovery

1 Answer

2001 pontiac sunfire wont start


I have had the exact same problem. There is an ignition lock that probably went off. There is a fuse box under the hood. The fuse that says ignition on it pull it out and put it back in. This should reset the ignition lock. Its a safety feature because the car thinks that someone was trying to tamper with it.

Dec 03, 2008 | 2001 Pontiac Sunfire

1 Answer

Car wont start


try to change the G28 sensor (rpm)













9

Jul 29, 2008 | 2002 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...