Cars & Trucks Logo

Related Topics:

simon Posted on Sep 07, 2013

My peugeot 307 shows the following codes P0120, P0341 and P0403 and it doesnt wanna start.Please advise on what should i do in order to get it back on the road again

  • simon Sep 07, 2013

    bought a new battery but still doesnt wanna start

×

1 Answer

A

Anonymous

Google the codes & the reasons you get those codes

The possible faults & solutions, at least generically, are
on the internet

Most likely will need a repair shop

OBD PO120
OBD PO341
OBD PO403

I don't see those codes causing a No Start

Check your battery first & get it running

5 Related Answers

myearwood0

  • 93 Answers
  • Posted on Feb 23, 2009

SOURCE: peugeot 307 1.6 petrol central locking problem

leave ign off with key out 3mins disconnet battery 5 mins reconnett and press lock/ unlock repeatedly until locks cycle through to re sync try this any probs come back to me

Ad

Wahs Team

  • 215 Answers
  • Posted on Sep 04, 2009

SOURCE: "when do i change the cam belt on a peugeot 307 sw diesel"

usually you should do it for peugeot diesel at 122000 miles along with water pump and the tensioner roller that runs under the cambelt too. But to be on the safe side do it at 100000 and save the fortune.
It took me (DIY job) about 6-8 hours as i wanted to save 450 pounds.

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Oct 30, 2009

SOURCE: Peugeot 307 power steering not working, but if I

electric pump or engine driven

Anonymous

  • 583 Answers
  • Posted on Dec 04, 2009

SOURCE: Peugeot 307 diesel 307 - Unblock diesel filter

if it says the diesel filter, then that is what it means,a fuel filter.normal service requirement on any vehicle and can be done for small dollars at any garage

Anonymous

  • 15 Answers
  • Posted on Apr 23, 2010

SOURCE: The brake lights on my Peugeot 307 have stopped

tour car requires a brakelight switch, u can find the switch under the glovebox.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2003 Peugeot 307cc 2.0 Petrol. Does not start but will crank. Code P1621 on the OBD reader Just had all spark plugs and 2 injectors replaced. Drove home with no issues whatsoever, park the car and the...

0helpful
1answer

Peugeot 308i no start after timing belt change

Hope you didn’t do the work and can take it back to whoever did.
1helpful
2answers
0helpful
1answer

Peugeot 307 not unlocking unless done manually ,no alarm sound contact, not starting at all, petrol tank was empty but filled already, what must i do ? please advise !

In some cases if you try to start a car on a weak battery, BSI will trip and lose all informations including immobiliser code including central locking synchronisation. In my opinion you are the victim of same situation. Just try to find a garage with PP2000 and let reprogram your BSI unit in order to start using your car again or buy one from ebay if you can do it yourself.
0helpful
1answer

How to fix an electrical circuit fault on peugeot 307

Test charging circuit (usually for free at parts store). A battery getting drained can cause much of this. With car sitting still you could try removing fuses one at a time to see if there is an unusual draw.
0helpful
1answer

ERROR CODE P0341, P0609, P0571

EOBD Codes:
  • P0341 - Cam Position Sensor signal error- check wiring.connector,bolted securely. Or sensor itself damaged.
  • P0571 - brake switch wiring or ECM problem
  • P0609 - VSS-vehicle speed sensor output -ECM problem if wiring is OK.
0helpful
1answer

I have a peugeot 307 and the engine immobiliser light comes on inconsistently but doesnt stay on all the time. it doesnt seem to make a difference to the car when im driving. the dash says anti pollution...

You have to connect you car to a diagnosis machine or you can buy a obd2 cable for around $20 on ebay and diagnose yourself. Its probably something related to a specific sensor or a couple of sensors, i.e. catalytic failure shows an error with the catalyser sensors, showing a code like 0420, then you can look it up online on what does that code mean and what you can do to prevent it from showing.
1helpful
2answers

PEUGEOT 307 FUSE KEEPS BLOWING (abs faults, horn doesnt work)

i have a peugeot 307 number 8 fuse keeps blowing so i have to keep changing the 20 amp fuse please help me i am trying to find out what is causing this
Not finding what you are looking for?

629 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...