- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
As it is a possibility some vehicles dont run with a faulty cam sensor . But if you are getting a cam sensor fault after head gasket id be rechecking the engine timing .
Maybe the carbon cannister is loaded up. Try parking the car facing uphill and see if that's better.
Starter is probably OK. Need more symptoms. OR it will be 20 question time. Takes a LONG time cranking B-4 the engine begins to run? That's what I'm guessing.
Does nothing to take the key back out and try it again.Just keep cranking until the engine starts to run.Don't be afraid to crank it for 15 seconds,or so.
could very well be the starter motor ,but check the ignition switch with a multi meter or a light first as the fault could also be in the ignition switch and i would isolate the fault first before paying out for unecessary parts
if i remember right those belts are not together cuz your car has two belts on it one that goes from the crank pullel that runs the a/c and alt and then one thats from the crank to the power steering
×