1992 4.3 v6 tbi s10 starting problem. Won't squirt

SOURCE: my s10 will turn over, but wont squirt gas through injecter

Does it crank? Do you have any codes? Check engine light? Do you have spark? No spark check coil, and connections, also it would be nice to know what year it is. Get codes read. No crank check battery and starter. No codes or lights check crank position sensor, make sure your pcm is good after replacing your ignition mod you could have blown it if you did do it right. (engine computer) Check cam sensor if applies. Crank and cam could prevent it from starting and I know one I think cam controls pcm's fuel delivery on gm's

Marvin

• 85242 Answers
• Posted on Jun 19, 2009

SOURCE: I brought my car to

have them replace the TPS (Throttle Position Sensor)

Steven Burke

• 120 Answers
• Posted on Nov 18, 2009

SOURCE: 1995 s10 pickup 4wd just replaced fuel pump, won't start.

replace the wireing harnes to the fuel pump gm had problems with them cost around $15 to 26 at autozone

Dan Doherty

• 1099 Answers
• Posted on Feb 12, 2010

SOURCE: 1999 Chevy Express 1500 cranks over but will not

Hi

Have you checked the EGR valve, and or the air flow sensor? both could cause it not to start!

Also ensure the earth battery lead has a good connection to the car body from the battery.

Please get back to me if your unsure about these parts.

Regards
Dan

SOURCE: I have a 1993 chevy s10 4.3l TBI that will not start.

Make sure the injectors are pulsing. Whatch to make sure mists oj fuel are coming out.