At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
In the arm handle there will be one are two screws remove them then with a panel removing tool locate the tabs behind the panel and pop them out. Replace in reverse order it really is easy just a little time consuming. O yea after you get all the tabs lose lift up on the panel will slip right out. Good luck
If you have already changed the motor and your fuse is good then it is a pretty safe bet that you have a bad switch. If you replace the switch you should solve the problem. I hope you find this helpful.
this problem is very easy to fix,,open door look for bolts or screws all around inside of door ,take them all off,then take door panel off ,,you will then see track with window on it loosen two track nuts ,fit window into track then tighting nuts ,put back on panel ,all screws bolts ,ect ect ,JOB DONE
could be but unless you actually check with Chrysler motor corp or you local dealership you wont know for sure. a Service bulletin is usually issued to dealership by the manufacturer if they identify a common problem. Just check with you r local dealer and all will be good in the end.
How replace rear wheel bearing in a 2007 Dodge Nitro?
ALL OF A SUDDEN MY DODGE NITRO WILL NOT START
abs esp and bas ligths always on
×