Question about Oldsmobile Regency

Open Question

Replace outer tie rod end 1998 gmc k1500 - Regency Oldsmobile Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
justuscc

Jimmy

  • 360 Answers

SOURCE: replacing outer tie rod on a 2000 dodge neon

put the tie rod back in and thread the nut on. then you turn the inner tierod with a pipe wrench or a big pair of channel locks. you can spray the threads with pb blaster or wd-40. also if ya have a propane torch this helps loosen the threads. apply heat to the outer tierod do not heat the inner. good luck jimmy

Posted on Oct 03, 2008

Ad
michigan man

edgar walker

  • 3533 Answers

SOURCE: replacing outer tie-rods on '98 volvo v70 wagon

try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 21, 2009

Anonymous

  • 81 Answers

SOURCE: How Do I Remove & Replace Worn Inner Tie Rod Ends

Cut band clamp. use tie wrap. Special tool to remove inner tie rod. Autozone or others have them to rent. Must align after replacement

Posted on Mar 27, 2009

carmanic

  • 215 Answers

SOURCE: 2000 LINCOLN LS - Outer tie rod removal assistance

Yes degreaser will not hurt it. The outer tie rod is retained only by one nut that connects it to the inner tie rod.Once you have this loosen just turn the outer tie rod to the left to remove it from the inner tie rod.

Posted on Feb 24, 2010

Greg-556

  • 18 Answers

SOURCE: replace inner tie rod ends on 2005 gmc 1500

Yes, there is an inner tie rod end wrench, there are a few different types of wrenches available. You should be able to borrow one from one of your local parts stores. (Oreillys, Auto Zone, Napa, etc..)

Posted on Jun 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need to replace inner tie rod on a 1998 ford ranger two wheel drive , driver side . engine size is 2.5. do i have to take outer tie rod off as well?


webbraymond2, Yes, you have to remove the outer tie to access the inner tie rod. When you do this, count the rotations of the tie rod as this will have to be replaced when the new inner tie rod is installed. Counting the rotations will allow you to put the outer tie rod close to where it was when you started the job. You are changing the toe setting when you have to replace either the inner or outer tie rod. You need to access and remove the jamb nut and boot before you can access the inner tie rod and this is why the outer needs to be removed first. A wheel alignment is advised after you finish the job. Good luck with this.

May 28, 2011 | Ford Ranger Cars & Trucks

1 Answer

How to replace inner and outer tie rods


For the inner tie rod end there is a special tool but the outer is easy make sure you count the turns taking out and then same counts going in.

Mar 06, 2011 | 1999 GMC Jimmy

1 Answer

How do you tighten a stearing wheel that has some play in it


The problem is probably not with the steering wheel- you most likely have bad tie rod ends.

You do not say how old your car/truck is, but the tie rod ends wear with time.

Usually it is the outer tie rod ends that go bad and cause loose steering, but you may want to replace both the inner and outer tie rod ends. Underneath, you can watch while somebody steers your wheels left and right, and you will see what ones are loose and need replacing.

Feb 12, 2011 | GMC Jimmy Cars & Trucks

1 Answer

How do i loosen the outer tie rod end to remove it from the bushing once tie rod is out of streeing knuckle i know it will need to be aligined and i need to count treads when putting new outer tie rod end...


You may need a propane torch to heat up the nut on end of outer tie rod. With tie rod still attached to steering knuckle try to loosen the outer tie rod end nut that is connected to inner tie rod. Pull tie rod end back out of knuckle. Use pliers or vise grips to hold inner tie rod end while turning outer tie rod end to the left.

Oct 27, 2010 | Dodge Intrepid Cars & Trucks

1 Answer

Replace inner tie rod ends on 2005 gmc 1500 . have ev370 moog parts is there a special tool 2 remove the inner rod ends from rack &pinnion. Ihave the tools 4 the outer but the inner looks like a big...


Yes, there is an inner tie rod end wrench, there are a few different types of wrenches available. You should be able to borrow one from one of your local parts stores. (Oreillys, Auto Zone, Napa, etc..)

May 31, 2010 | 2005 GMC Sierra

1 Answer

1998 cutlass outer tie rod replacement proceedure


Take it to a wheel alignment place since it will have to aligned anyway after it is put on. You will need a special tool to remove it from spindle anyway.

Jun 29, 2009 | 1998 Oldsmobile Cutlass

2 Answers

Repalcement process on inner tie rods 05 silverado


undo bolts on inner and outer tie rods,u might need balljoint fork separator or 2 jaw puller to take them off of relay rod and steering knuckle,measure lenght of tie rod,loosen tube clamp and undo tie rod from tube,when installing make sure lenght is the same as before or wheel alignment will be off!

May 12, 2009 | 1992 Chevrolet K1500

1 Answer

How do i replace the the outer tie rod end on the driver side of my 98 honda accord''??? please help


break the tie rod end nut loose, then get a pickle fork tool and remove the joint from the steering knuckle, reverse to install the new end..

Apr 06, 2009 | 1998 Honda Accord

2 Answers

Tie rod problem 98 Dodge


There is a tool that you can use that will make it easier for you. To get to the tie rod end, remove the wheel and take the outer tie rod end loose from the hub. You will have to use a hammer and hit the socket where the end goes into the hub to free it up. Once you have the tie rod loose from the hub, loosen the nut behind the outer tie rod end. Count the revolutions as you unscrew the outer end off and write te number down so you will know how far to put it back on. This will save your alignment. Now, the end that is still there is your inner tie rod end. You will have to undo the bellows boot to get to the nut. The tool will slide over the end and secure onto the nut. Now you just unscrew this and replace with you new inner tie rod end.
Please remember to rate this fix.

Feb 16, 2009 | 1998 Dodge Grand Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Jonah Oneal

Level 3 Expert

14092 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...