2005 Chevrolet TrailBlazer Logo
Posted on Apr 13, 2009

Service engine soon light flashing on acceleration

2002 Chevrolet Trailblazer

Several days ago I was running around town and vehicle was running fine. About the third time UI startted it it was barely running. It appeared to me the choke had stuck.
I took it home and removed the air box and sprayed the throttle body down with a carb. cleanner startted it and it ran better than it had in a while.
Last night as I startted it to come home from a resturant it is missing and the "check engine soon" light flashes on aceleration. then goes off.
any ideas? This morning my 2005 Chevy Trailblazer was driving fine and then it felt as if it was sputtering (I felt it through the gas pedal) or missing, so I accelerated and it kept going but then my check engine light flashed on and off several times and I slowed down a little bit, then the light went off. I made it to work but am afraid of what may happen come lunchtime. Any ideas?

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 5 Answers
  • Posted on May 16, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: May 16, 2009
Answers
5
Questions
0
Helped
7122
Points
22

It sounds like u got a coil pack going out. Alot of times when your engine is cold or when you arn't putting a load on it the coils won't fail. How ever when the engine reaches operating temperatures and there is load on the coils that is when they are going to break down. my advice would be to get a scanner and see what cylinder the missfire is at then swwap that coil to another cylinder to verify that the coil is defective. If it is purchase another with a new spark plug put it in and let it rip.

1 Related Answer

Anonymous

  • 4 Answers
  • Posted on Mar 17, 2009

SOURCE: Service engine soon light flashing on acceleration

When the service engine soon light is flashing there is a miss fire in the motor if you look in your owners manual it will tell you that.The same thing happend to me and it endid up to be the cat...

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Engine light flashing running rough

Read the fault codes and replace faulty units.
1helpful
2answers

Chevy Reduced Engine Power and Auto Gear Transmission

still sounds like another sensor is bad. take it to shop and have it tested would be my suggestion. good luck.....
3helpful
2answers

I have an 02 Chevy Trailblazer & the Service Engine Soon light is on & flashes while accelerating. Also has a very rough idle. Any idea what the problem may be? Thanks

Rough idle can be caused by dirt in throttle body or EGR system, but there are many other possibilities. The service engine light indicates the computer has detected a fault. If you can get a free scan at your local parts chain and post the trouble codes to us we can give you more specific repair recommendations.
1helpful
1answer

Error code 1680

Chevrolet OBD Fault Codes
DTC P1680 - Driver 5 (ECU malfunction)

This is any internal ECU problem (ECU = ECM = PCM device); check other details HERE; keep in mind that its possible that you have to reprogramm the ECU.

Here is a bulletin for this problem.Subject: Service Engine Soon Light On, P1680 (Reprogram or Replace PCM)

Models:
2004 Buick Rainier
2004 Chevrolet Trailblazer
2004 GMC Envoy
2004 Oldsmobile Bravada with 4.2L Engine (VIN S - RPO LL8)

Some customers may comment on the Service Engine Soon Light coming on. Upon investigation, the technician may find a P1680 diagnostic trouble code Check the resistance of the accelerator pedal position sensors using the procedure in the appropriate Service Information for DTC P1680.

If the resistance of the accelerator pedal position sensor is within the specifications shown in the Service Information and the vehicle was built prior to the following VIN breakpoints, then reprogram the PCM with the latest calibration.

If the resistance of the accelerator pedal position sensor is within the specifications shown in the Service Information and the vehicle was built after the following VIN breakpoints, then replace the PCM. If the resistance of the accelerator pedal position sensor is outside the specifications shown in the Service Information, then continue with the diagnostics for DTC P1680.

VIN Breakpoints
• Vehicles built at Oklahoma City Assembly Plant - 46192755
• Vehicles built at Moraine Assembly Plant - 42315833

Hope this help
0helpful
1answer

My check engine light has been on for about a year now my car is starting to run funny and when you accelerate the service engine soon light flashes on and off

You need Error codes clearing on engine Otherwise it will play up to keep letting you know there is error codes that need attention
11helpful
3answers

My oil light with a little wrench beside it came on this morning, I have a 2007 chevy trailblazer and I just had a oil change 1 month ago

If the service light is on in your TrailBlazer, open the door, turn the key to ignition position and push the accelerator pedal 5 times, the service light will flash. flash your high beams and you're done.
0helpful
1answer

2004 Chevy Trailblazer engine stalls after coolant temp senor R&R

clean your throttle body....same thing happened to me and my truck runs great now.
23helpful
1answer

Service engine soon light flashing on acceleration

When the service engine soon light is flashing there is a miss fire in the motor if you look in your owners manual it will tell you that.The same thing happend to me and it endid up to be the cat...
1helpful
2answers

Service engine soon

hi, this is just a reset issue. sometimes the CPU can become confused. the original warning that informed you about your gas cap is still in the cpu's memory. you will have to reset the cpu and, this will clear the warning. After the reset, it will stay off. chevy cpu's tend to do this from time to time.
Not finding what you are looking for?

5,187 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29492 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...