Please advise on the location of the spark plugs. Thank you.
You remove the rectangular plastic cover on top of the engine(2 screws), under that is the plug wires and spark plugs. Pull wires straight up, remove plugs with proper spark plug socket, extension and ratchet, reverse to install.
Platinum plugs are not required but will allow longer change intervals. Check the gap but do not gap them, if they are not properly gapped. Bring them back and asked for new ones.
The metal's on the Platium plugs are harder then copper plugs and can break upon trying or break in your cylinder when in uses.
Good luck and hope this helps
937 views
Usually answered in minutes!
Thank you so much for this very quick an accurate answer. I couldn't find it in the car manual. Again, thanks!
×