Getting Park light lit up on the screen and a message appears as Park break malfunctioning.Getting Park light lit up on the screen and a message appears as Park break malfunctioning.
You can't post conmments that contain an email address.
If the lever isn't latching the spring that holds the pawl to the latch gear is off. If it is coming full out and not holding the brake to keep car from moving, the brake shoes need adjusted up.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
. This could be due to a malfunctioning locking hub control system, which is responsible for engaging the front wheels . Another possibility is that the front axle actuator is faulty . The rear breaks may have seized, another possibility, after the break was on so long.. Regarding grinding, It's possible that the transfer case has been damaged due to lack of use or that there is a problem with one of the gears inside.About the power issue, there could be an issue with the drivetrain. It's possible that one of the axles has become disconnected or that there is a problem with one of the differentials. You mentioned that both driver side and passenger rear wheels are stuck, which could indicate a problem with one of these components. I recommend taking your vehicle to a certified mechanic for diagnosis.
your vsa is vehicle stability assist that works with the abs system, verify brake calipers for proper functioning, sounds like breaks stick and cant return efficiently after breaking, vsa is a traction control light, if both lights remain on without flashing, those systems are disabled due to a problem, scan vehicle for possible abs sensor malfunction
See if they function any differently with and without your headlights on. A common problem with these Jeeps is a malfunction within the wiring that causes a single break light to stop working when the headlights are on, yet work when the headlights are not.
This light can be caused by your parking being on. If not, it's most likely caused by low brake fluid. Check the fluid level under the hood and fill it up if needed. If that doesn't get rid of the light, you should have it towed to a dealer and don't drive as your brakes may fail at any moment without notice
When you experience this problem, check to see if your brake lights are coming on. It could be as simple as a brake light switch malfunction. If the brake lights are functioning as the problem is occurring then you could for example have a problem with the shift interlock solenoid.
Getting Park light lit up on the screen and a message appears as Park break malfunctioning.
×