Cars & Trucks Logo

Related Topics:

Anonymous Posted on Aug 28, 2013

I replaced the ignition switch in my 1987 chevy r30 and still no power to dash or starter. the check engine light will not come on. have headlights and good battery any idea of cause.

1 Answer

Denis Houle

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Chevrolet Master 1,414 Answers
  • Posted on Aug 28, 2013
Denis Houle
Chevrolet Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Aug 02, 2013
Answers
1414
Questions
0
Helped
498497
Points
4096

Have all fuses check, see the steering connector well connected.or find a diagram for starter and dash

3 Related Answers

dennymulford

Dennis Mulford

  • 1055 Answers
  • Posted on Dec 28, 2009

SOURCE: I have a 1998 Chevy S10 pick up, have a starting

can you turn the engine by puting a wrench on the harmonic balencer? if not then the engine is locked up!!! if you can turn it this way then check your battery conections and body grounds!!

Ad

Anonymous

  • 79 Answers
  • Posted on Apr 01, 2009

SOURCE: no power to starter 2004 chevy tahoe

Hi
It could be your neutral safety switch. It could be the starter relay which is located in the fuse panel box. It could be the smaller wire going to the starter could be loose or corroded.

Mark Glawdecki

  • 82 Answers
  • Posted on Oct 18, 2009

SOURCE: I have a 1992 Dodge Ram Van 318 ci. It died while

I had an intermittent starting problem and then a no start situation in a 1991 with the same engine. Changed the pickup inside the distributor. Less than $30.00.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have no power anywhere. i can jump solenoid and engine turns over but no fire. i suspect ignition switch but would that cause no power through out the car?

The fact that you can turn the engine but not get it to fire would suggest the battery is ok. The fact that you have no headlights, dash lights etc. would point to blown fuse/fuses. Even if the ignition switch was faulty you should still be able to switch the headlights on. I would check the fuses and the ignition switch wiring.
1helpful
2answers

Turns over but won't start

I would start checking fuses for power. It could be a battery cable issue or something in the fuse box. The dash lights would not be powered thru the key switch, but the other stuff would be. Provided the key switch is getting power for accessories.
0helpful
1answer

1987 toyota pickup lost all electrical except headlights

What works? Just headlights? Does anything electrical work that does not need the ignition switch to be in the on position? Possibly four way flashers, brake lights, horn, interior light, dash lights in instrument panel as well as headlights should all work without the key in the ignition and in the acc or on position. If this is what you have, then I would say you need to replace the ignition switch.
Hope this helps.
0helpful
1answer
0helpful
1answer

What happens if a ignition cylinder goes bad

The problem is in your ignition switch if you can verify that power is going to the switch. If no power is going to the switch, you could have a maxi fuse blown, the fuse that sends power to the switch.
0helpful
1answer

I AM HAVING A PROBLEM WITH THE FUEL SYSTEM. THE SENDING UNIT IN THE TANK HAS NO POWER. AND AS FAR AS I CAN TELL, THE WIRE HARNESS HAS NO POWER EITHER. I CHECKED THE FUSES, ALL ARE GOOD. THIS IS A 1987...

hows the battery-are connections tite--harness cud hav a flaw-inspect or let a pro doit--there are maxifuses in engine area--try unplugin the connect to the unit and clean it with electric solvent then plug bac in--do u hav a repair manual*
0helpful
1answer

I have a 1996 chevy lumina. the motor wont turn

You need to check for power at the purple wire going to the solonoid while key is in the start position, if no juice then check starter relay-under hood- fuse ,and ignition switch
1helpful
1answer

No power to cab, no power to start, but clock has power

check fuse block for shorts, melting discoloring,on back side of fuse panel around starter relay. loose connection causes fuse block to over heat will need to be replaced.hope this helps.
1helpful
1answer

Where is the fuse box on 1987 P30 Chevy -

does the dash pad lift up on drivers side
Not finding what you are looking for?

164 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...