2005 Jeep Grand Cherokee Logo

Related Topics:

Posted on Nov 30, 2017
Be the first to answer

Jeep uconnect failure

The unit stopped working when transferring a call re bluetooth only static.
then all the electronics associated with uconnect would not respond properly to commands. i think it has to due with the connections of the electronics of the computer control. however i do not know where to find them nor how to test

Answer This Question

4 Related Answers

Anonymous

  • 321 Answers
  • Posted on Oct 03, 2008

SOURCE: 1999 jeep grand cherokee loredo 4x4

The transfer case is no longer a simple device controlled with a single manual stick shifter.Just like the engine and trans,fuel system,exhaust system,electrical system...etc etc....It is a complex electrical world/circuit all unto itself.There are approximately 2 sensors,two switches,and an electric MOTOR and a computer,that all work in unison to provide the luxuries of "shift on the fly" transfer case abilities.As a complex electrical system,it must be diagnosed as such.Basic steps in diagnosing a problem follows in order of sequence....1:pull Diagnostic Trouble Codes (DTC)'s from the transfer case system 2:For every dtc is a diagnostic route to verify all the electrical sensors and controls and COMMANDS are in place anf functioning. 3: If all external electrical componenets are tested and verified functioning,the last diagnosis is 4: Internal transfer case failure.

Ad

Anonymous

  • 295 Answers
  • Posted on Oct 26, 2009

SOURCE: uconnect auto pairing

Check with jeep.com/uconnect to make sure it is compatible. The phone is the problem 9 time out of 10. The cell phone provider can upgrade the software to make it compatible with the uconnect.

Anonymous

  • 2926 Answers
  • Posted on Apr 13, 2011

SOURCE: 2006 Jeep Commander ESP/BAS and

Was the battery replaced and this occured afterward?

Anonymous

  • 1 Answer
  • Posted on Nov 14, 2012

SOURCE: Uconnect has stopped working completely. will not activiate.

when i press the voice recognition button or the the phone button on my steering nothing works not even sound

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Car thinks phone call in progress when i get in the car and connect to bluetooth.
ask a samsung tech about possible glitches with uconnect
Read full answer
Jun 17, 2019 • Dodge Cars & Trucks
0helpful
3answers

I can’t download my iPhone 8 phone book into my 2012 Grand Cherokee Uconnect.
Turn iPhone Bluetooth On:First you want to make sure that Bluetooth is functioning on your iPhone. Click on the Settings icon from the iPhone desktop. From the settings screen click General to show the iPhone General Settings as displayed in the below image. Notice you can see if Bluetooth is on or off from this screen. General Settings screen you can click on Bluetooth to configure the Bluetooth settings. On the Bluetooth screen shown below click to the left of Off to turn Bluetooth On.
  1. Begin Uconnect Setup:Now that Bluetooth is operational on the iPhone you can start the Uconnect process. Click the Uconnect button on the rear view mirror to begin. The voice from the Uconnect system will ask you to verbally select one of the options from the menu. Once Uconnect asks for your input say "Setup" to begin the process of syncing the iPhone.
  2. Start Phone Pairing:Once you say setup in the above step the Uconnect system will list numerous options available from the setup menu. One of these options is "Phone Pairing" so when the Uconnect system asks for the choices from the setup menu say "Phone Pairing".
  3. Pair a Phone:In the Phone Pairing menu you can modify current entries or begin pairing a new phone. After Uconnect lists all of the choices you should say "Pair a Phone" to begin the process of pairing the iPhone.
  4. Uconnect Pin Code:The first step in pairing a phone is setting the Bluetooth Pin Code that authorizes that phone to pair with the Uconnect system. When asked for the Pin Code say any four digit combination such as "1 - 2 - 3 - 4". Uconnect will repeat back the Pin Code so you can verify it has recorded properly.
  5. Connect iPhone To Uconnect:After you have set the Pin Code for the Uconnect system you need to view the iPhone's Bluetooth Settings screen which you can get to following the steps in Step 1 above. Before the Uconnect system shows up in Bluetooth the Bluetooth Settings screen will look similar to the below where you may have other Bluetooth devices showing or not.After a couple seconds the Uconnect system will display as "Hands Free" as shown in the below image. Notice it states that it is not yet paired,,,,,
  6. Click on the Hands Free device showing in the Bluetooth devices list above. This will open a new screen as shown in the below image that prompts you for the Pin Code you specified in Step 5.

    Enter the Pin Code and then click the Connect button in the top right corner of the above window. This will pair the iPhone with Uconnect and take you back to the Bluetooth devices screen where the Uconnect Hands Free device will now show Connected as shown in the below image.

    After the device is connected you will be prompted by the Uconnect voice again so proceed to the below steps.
  7. Phone Name & Priority: After connecting the iPhone you will then name the phone and set a priority between one and seven. Name the phone anything you would like and if this is your primary phone set the priority to one so this phone always connects at a higher priority than any other phone.
  8. Verify & Test:Now have a friend dial your cell phone while you are in your car to see if the music volume lowers and the Uconnect voice tells you there is an incoming call from a certain number. To make calls you can press the Uconnect button and follow the voice prompts.
    9. The Uconnect system is a great way to safely use your cell phone in the car.
Read full answer
Jan 13, 2018 • Cars & Trucks
0helpful
2answers

My 2014 Jeep Uconnect system has stopped working. It has worked for 5 months since new - but has now dropped out and will not either, recognise pairing or connect on Iphone 5 and 6 and Nokia.
get it serviced, to fix the magic.
did you google Uconnect yet>? see that hug web page for jeep uconnect support, seems not.
Read full answer
Mar 22, 2015 • Jeep Cars & Trucks
0helpful
1answer

My uconnect stop working. How do I fix it?
Try to turn off and on your Bluetooth on your phone, uconnect might not connect your phone automatically if it's not your favourite. You can see on your settings on uconnect. If that doesn't help, take it to the dealer, it might need a quick update. Good luck
Read full answer
Jan 13, 2015 • 2006 Jeep Grand Cherokee
0helpful
1answer

Uconnect terminates when "Bluetooth streaming audio" command is given in my 2010 dodge grand caravan.
Select Bluetooth on both devices. Seams the uconnect is being canceled out by your Bluetooth. Or use uconnect as opposed to Bluetooth. Maybe seek further advice, I am not the expert on this one :<
Read full answer
Sep 25, 2014 • 2010 Dodge Grand Caravan
0helpful
1answer

UCONNECT Activation problem for 2008 Avenger R/T
I also have this same problem, I installed the bluetooth module and the ipod integration kit. I have the same head unit. Did you find an answer on this? if so let me know what you found out. thanks

[email protected]
Read full answer
Feb 20, 2010 • 2008 Dodge Avenger
1helpful
2answers

My 2005 jeep grand cherokee limited uconnect on the rearview mirror dosent work, wondering what i can check to fix this
9 time out of 10 it is the phone not the Uconnect. Try to pair a different phone on the device then see what happens.
Read full answer
Oct 25, 2009 • 2006 Jeep Grand Cherokee
0helpful
1answer

UConnect stopped working
There is most likely a fuse, i don't have a Cherokee manual handy for that model year but i know on the Liberty of the same year there is a fuse for the UConnect in the interior fuse box. If you have your manual in the glove box check the glossary for fuses and there is a diagram showing what each fuse is with a number and an explanation of what each fuse runs in a chart. If the fuse is ok it might just need to be reset, pulling the battery negative cable and waiting 10-15 mins and then reconnect will usually clear up any issues and reboot everything, just be aware that if you have antitheft lock on the stereo that you disable that before pulling the battery cable otherwise the radio will be locked after reconnecting the battery cable. You can also try just pulling the fuse that supplies power to the Uconnect and leave that out for a bit.

However, i kinda doubt its a fuse, because usually the Uconnect and stereo are on the same fuse, so if everything else is working that might not be it but its worth checking before taking it to a dealership.
Read full answer
Jan 11, 2018 • 2006 Jeep Grand Cherokee
0helpful
1answer

Uconnect has stopped working completely. will not activiate.
when i press the voice recognition button or the the phone button on my steering nothing works not even sound
Read full answer
May 07, 2009 • 2006 Jeep Grand Cherokee
3helpful
2answers

UConnect dead - everything else OK...
unplug the battery and wait a few min, this will reset the computer and the u conect will work...
Read full answer
Apr 25, 2009 • 2005 Jeep Grand Cherokee
Not finding what you are looking for?

View Most Popular

2005 Grand Cherokee

  • Cars & Trucks

Related Question

Car thinks phone call in progress when i get in the car and connect to bluetooth.

  • Dodge Cars & Trucks

Related Topics

141 views

Ask a Question

Usually answered in minutes!

Popular Questions

GAUGES GO CRAZY AND SOMETIMES VEHICLE WON'T START

2002 Jeep Grand Cherokee

2007 JEEP GRAND CHEROKEE. TRANSMISSION OVER TEMP

2007 Jeep Grand Cherokee Overland

Fuse panel diagram for 2002 Jeep Grand Cherokee

2002 Jeep Grand Cherokee

2007 Jeep Grand Cherokee won't CRANK - battery is fine.

2007 Jeep Grand Cherokee Overland

Firing order for a Jeep

Jeep Grand Cherokee Cars & Trucks

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 2005 Grand Cherokee Manual

2005 Grand Cherokee

Loading...