Wiper blades stopped working on 2000 Taurus

Question edited for clarity.
Question moved to correct year make model category.

Check the fuses and relays.

Ford Taurus (2000-2007) fuses and relays

https://fuse-box.info > ford > ford-taurus-2000-2007-fu...

2003 - Here you will find fuse box diagrams of Ford Taurus 2000, 2001, 2002, 2003, 2004, 2005, 2006 and 2007, get information about the location of the fuse ...

2003 Ford Taurus fuse box diagram - StartMyCar

https://www.startmycar.com > Taurus > Fuse box
The 2003 Ford Taurus has 2 different fuse boxes: Passenger compartment fuse panel diagram. Power distribution box diagram. * Ford Taurus fuse box diagrams ...

Ford Taurus (1999 - 2007) - fuse box diagram - Auto Genius

https://www.autogenius.info > ford-taurus-1999-2007-f...
Jul 2, 2018 - Ford Taurus (1999 - 2007) - fuse box diagram. Year of production: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 ...

try changing the wiper relay first and check out the fuses if all is good then the motor itself may have seized or the worm drive may be worn or broken check the toothed spline where the wiper blade attaches the splines may be smooth or broken which will stop the blades moving back and forth

dont b a **** fool and cut wires under your dash for some boom booms in your car buy the connecting harness they sell theres one for every make and model out there solves guessing and saves headaches... dont be a ******* buy the right parts

I dont know the exact position, but they are located inside the fuse box inside your car. Their not the one under the hood. Good luck.

WIPER ARM LINKAGE COULD BE BINDING.REMOVE WIPER ARM TO SEE IF WIPER MOTOR OPERATE SLOWLY.IF YES CHECK TO MAKE SURE WIPER MOTOR GETTING GOOD GROUND CONNECTIONS BY CHECKING MOVING WIRES .IF WIPER MOTOR SPEEDS UP YOU HAVE GROUND WIRE PROBLEM. IF WIPER MOTOR REMAIN SLOW GROUND WIRES CHECK OUT OKAY.REPLACE WIPER MOTOR.IF WIPER MOTOR RUN FAST NORMAL SPEED AFTER DISCONNECTING WIPER ARM.WIPER ARM LINKAGES IS BINDING OR NEED SOME LUBRICATION TRY WD40 SEE WHAT HAPPENS.LUBRICATION DONT HELP WIPER LINKAGE COULD BE DAMAGED.

Check if the wiper fuse is loose in the fuse box. Take it out and reinsert it. If it is still loose, take a small short piece of wire and insert it with the fuse to make in tight in its fuse slot.

Check the corresponding fuse in the fuse box. If fine, could be the multi function switch that controls/adjusts wipers, blinkers, high beams, etc.. Hope this helps.

it sounds like the wiper transmission has broken/slipped off of the wiper motor. Remove wiper motor and check wiper transmission.

need to check a few things, start with ur fuses, then check ur switch, then check if the right voltage is gettin to the motor, then check the motor, u need to follow a logical line starting at the most simple component and then go from there
hope this helps

You need to check fuse 211 a 15 amp fuse that is hot in run or start. Fuse 227 which is hot in run or accessories it is a 10 amp fuse and fuse 215 a 30 amp fuse which is hot in run and accessories. All these fuses are located in your central junction box.