I recently bought a used '00 Hyundai Elantra 5-speed - there was no owner's manual and I'm having no luck finding one online. There's a button on the console that says "Cruise" and has an indicator light above it. I do not see anything to set speed as with cruise control and pressing the button seems to do nothing but make the indicator light glow. What is this button for?
Actually a really simple thing. Too elaborate on what the first response put, simply click that "Cruise" button so the light is on. Next, when you're at the speed you want to mantain, click the button on the end of the windshield wiper switch. If you want to drop your speed after that, simply hold down on that same button. If you want to raise the maintained speed, simply slide in the button facing you on the windshield wiper switch. If you want to turn OFF cruise control you can do it one of two ways, either press the "cruise" button again, or simply tap the brakes. If you want to accelerate briefly but maintain that cruise control speed, simply use your accelerater pedal.
I have this same car. The place you set speed control is on the windshield wiper switch on the right side of the steering column. The button with the indicator light has to be pushed in order to use the cruise control but just because the indicator light is on, it does not mean the cruise is on. Hope this helps a little. If you need more info and someone else doesn't answer more eloquently.. I'll check back and try to give you more info. :-)
Hi guys. I have a hyundia coupe se 2.0 16v 1998. My cruisr control suddenly stopped working. When you press the switch on the dash thats says cruise. That light comes on but nothing showd up by the revs counter. Ive checked the fuses inby the engine and fuses down by the excellerator pedal. Any ideas please people..? :)
783 views
Usually answered in minutes!
Thank you very very much! I've never seen cruise controls on a windshield switch... worked like a charm - thanks again!
×