SOURCE: relacing the inside driver side door handle
Its very easy to do, did mine today, pull the door panel off, 3 screws 2 on each corner of the bottom of the door and one in the grab handle tray. Look at the door handle there will be a small plastic circle that pops off remove plastic piece and remove screw, lift door panle upwards and off. 3 screws for the new door handle remove old one unclip door lock and unclip door handle install new one same way you took the old one off.
Part is $26.00 at kia, takes 15 minutes to repair!
SOURCE: 1997 Toyota 4Runner; Drivers side door will not
There are 2 metal rods that hook into the handle. They are retained by a plastic clip that is prone to wear out. You must remove the inner door panel and replace these clips reataching the rods. Parts available through Toyota.
SOURCE: Replace glass, drivers door on 1997 GMC 1/2 ton Truck ,2wd, Power windows
you might also have to drill out the rivets that hold the lock actuator on to be able to manage the last roller into the scissor assembly. Use larg 1/2 in sheet metal screws to reattach.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/cody_17f08cf8e340c06c
SOURCE: Hyundai accent 1997, the driver side door handle broke
taking off the door panel is a lot of work. i can explain it all to you if you still have the same problem. i've replaced all of my door handles for all 4 of my hyundai's doors, so i'm experienced in this department. would you like a step by step walkthrough still?
140 views
Usually answered in minutes!
×