Crank Main caps Tightening Torque
For the 12 Pointed Head Bearing Cap Sub-Assembly Bolts
Start from center bolts and tighten in a clockwise rotation working out
Step 1 all bolts 22 Nm or 16 ft lb
Step 2 all bolts 44 Nm or 32 ft lb
Step 3 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Step 4 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Hexagon Head Bearing Cap Sub-Assembly Bolts
1ZZ-FE Engine 18.5 Nm (14 ft.lb)
2ZZ-GE Engine
18 Nm (13 ft.lb)
Connecting rod:
1. Apply a light coat of engine oil on the threads and under the heads of the
connecting rod cap bolts.
2. Install and alternately tighten the 2
connecting rod cap bolts in several passes. Torque: 1ZZ-FE:
20 Nm (204 kgf-cm, 15 ft. lbs.) 2ZZ-GE:
30 Nm (306 kgf-cm, 22 ft. lbs.) If any of the
connecting rod cap bolts does not meet the torque specification, replace the connecting rod cap bolts.
3. Retighten the cap bolts by
90° more
4. Check that the
crankshaft turns smoothly.
MAIN + BIG END BOLT TORQUES YOYOTA AVANZA 1.5
torque specs 1997 dakota main bearing cap bolts
I need to know what is the torque on rod baring bolts. Its for a 2001 dodge stratus 2.4L DOHC 4cylinder motor. If you can help me I appreciate it thank you.
what is the torque for connecting rod bolt
ring gear bolts 85 pickup
head bolts torque settings for toyota cressida 2.4 3y motor
cylinder head torque specifications
specs for valve cover bolts
crankshaft pully
Torque specs on camshaft bolts for 99 Toyota rav 4
TORQUE SPEC FOR HEAD
cyl head bolts toque settings toyota yaris 1kr
torque specification to retension head bolts after 1000 km
need specifications
specs on head torch
Where is the engin tempriture sener on a 1991 toyota tercel
Where is the engin tempriture sencer on a 1991 toyota tercel
toyota 1kz te conrod and main bolts torque specs
I need to know what the oil pump cover fastener torque spec is for a 1999 toyota rav4 with a 2.0L engine is
changing connecting rod rings plug. need the torque specs.
×