VSA,BRAKE LIGHT AND D FLASHING LIGHT ON AT THE

your vsa is vehicle stability assist that works with the abs system, verify brake calipers for proper functioning, sounds like breaks stick and cant return efficiently after breaking, vsa is a traction control light, if both lights remain on without flashing, those systems are disabled due to a problem, scan vehicle for possible abs sensor malfunction

Vsa,abs,and brake all work off of the same sensor. You have a problem with one of the following system. Vsa vehicle stability assist, abs anti lock brakes, or the brakes themselves. My guess is either the abs or vsa

You need to have the vehicle scanned for fault codes and then the causes of those codes diagnosed.

You will need to have this car checked out by a professional with the right diagnostic equipment for Hondas. The Vehicle Stability Assist (VSA)***, brake and ABS warnings may just be due to a failed sensor or sensors but you need to have a proper diagnosis carried out so the causes can be identified and any failed parts replaced.

The flashing D light relates to the auto transmission and may well be a caused by a faulty sensor on the transmission or something else. The correct scanner should throw up any fault codes being generated. In the meantime if your Accord model has the engine bay filler tube and diptstick for the auto transmission , check your fluid level in the auto transmission.

***VSA..................
http://techinfo.honda.com/rjanisis/pubs/OM/RL0000/RL0000O00189A.pdf

EASY ACURA HONDA ABS VSA BRAKE FCW SH AWD TRACTION CHECK ENGINE LIGHTS FIX

I have a 2014 Ridgeline SE with 8,900 miles.
Says low brake oil but it's full, and VSA is messed up.
I say it's a VSA computer program problem.

Whenever this warning or any other stays on in the dash it is indicating that the systems control module has detected a fault, it then disables the system as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Please see my tip at http://www.fixya.com/cars/r6003525-abs_traction_control_lights . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

I had this problem on a Ridgeline and did just about everything trying to avoid taking it to the dealership. VSA stands for Vehicle Stablility Assist and if your light is flashing then you'll probably need to take it to the dealer and have the system checked for problems and reset. I don't know of any mechanics with the software that Honda has for this system.

The Vehicle Stability Assist system is turned off. Vehicle Stability Assist (VSA) is an electronic stability control system that works in conjunction with the Pilot's drive-by-wire throttle and its 4-channel ABS systems to enhance controllability while the vehicle is accelerating, braking, cornering or when the driver makes a sudden maneuver. VSA functions by applying brake force to one or more wheels independently while also managing the throttle, ignition and fuel systems to help the vehicle maintain the driver's intended path of travel.

You need to find the VSA button on the dash and push it, this will activat the VSA and turn off the yellow light.

I UPGRADE IT MY TL NON TYPE S ...TO THE O.E BREMBO KIT....TOGETHER WITH THE ROTORS AND BRAND NEW ABS SENSORS.......WHY IS THE ABS ,VSA, ABD BRAKE LIGHT ON??MY ACURA IS