My friend has an 02 Acura Rsx Type S nad the clutch pedal has

so the problem is that you cannot get it into gear from a stop
(grinds trying to force into gear) . if you have a clutch pedal, what I mean is that clutch pedal has pressure behind it,moves up and down by itself, then its a clutch assy needs replaced.clutch disc/pressure plate/release bearing. if there is no pedal,falls to floor, its either clutch slave or clutch master failure issue(lost all fluid). but nothing points at needing a transmission,it should be fine

CAR BRAKE PROBLEMS

It can be issue with master cylinder or the problem is there is still some air there in the system,that has to be bleed.Or else the parts replaced are not aligned properly/.I suggest everything back.

There are few help links mentioned below to troubleshoot the issue.

Click the link below and follow its procedure:-----

All types of brake problems and repairs http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

----------
Brake Fade Issue? http://whoisbyme.blogspot.in/2012/07/brake-fade-issue.html

-----------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

----------
Car Brake lines have no pressure? http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html

------------
Car Brakes Dragging? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-dragging.html

-------------
Car Brakes grabbing? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-grabbing.html

-----------
Car Brakes Making Noise? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

-------------
Car Brakes Pulling? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-pulling.html

----------
Pulsating Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/pulsating-brake-pedal.html

---------
Spongy brake pedal? http://repairhelpcenter.blogspot.com/2011/12/spongy-brake-pedal.html

----------
Hard Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/hard-brake-pedal.html

------------
Fading Sinking Brake pedal?

http://whoisbyme.blogspot.in/2012/06/fading-sinking-brake-pedal.html

-------------
Feels Like Brake pedal Pulsating http://repairhelpcenter.blogspot.in/2012/06/feels-like-brake-pedal-pulsating.html

-------------
What is Brake Drum Bar? http://repairhelpcenter.blogspot.in/2012/02/what-is-brake-drum-bar.html

------------
ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

-----------
Vibrations while braking On Chevrolet Van? http://technoanswers.blogspot.in/2012/04/vibrations-while-braking-on-chevrolet.html

-----------
Dragging brakes? http://howtobyme.blogspot.in/2012/03/dragging-brakes.html

------------
Brake pedal stuck? http://howtobyme.blogspot.in/2012/03/brake-pedal-stuck.html

-----------
After replacing brake rotors and pads, brake pedal remains on floor? http://technoanswers.blogspot.in/2012/02/after-replacing-brake-rotors-and-pads.html

----------
How to replace Brake Power Booster? http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

-----------
1997 Chevy Tahoe Brake lights not working? http://technoanswers.blogspot.in/2012/02/1997-chevy-tahoe-brake-lights-not.html

------------
How to service Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-service-drum-brakes.html

-----------
What type of problems usually noticed on Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/what-type-of-problems-usually-noticed.html

----------
How to test Drum Brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-test-drum-brakes.html

---------
Brake Bleeder Screw Function? http://repairhelpcenter.blogspot.in/2012/02/brake-bleeder-screw-function.html

---------
Toyota Tundra: Parts diagram to replace Brake Drums?

http://technoanswers.blogspot.in/2012/06/toyota-tundra-parts-diagram-to-replace.html
---------- Squeak and grinding sound is heard when brakes are applied?

http://technoanswers.blogspot.in/2012/02/squeak-and-grinding-sound-is-heard-when.html

------------

Brake Pads Inspection on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-pads-inspection-on-acura-integra.html

-------------

How to remove Brake Pads on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-pads-on-acura.html

--------------

How to remove Brake Disc Rotor on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-disc-rotor-on-acura.html

------------

Brake Caliper OVERHAUL on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-caliper-overhaul-on-acura-integra.html

------------

How to remove Brake Caliper on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-caliper-on-acura.html

------------

How to remove Parking Brake shoes on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-shoes-on.html

-----------

How to remove Parking Brake Cable on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-cable-on.html

-------------
Brake pedal is pulsating and vibrating? http://repairhelpcenter.blogspot.com/2012/01/brake-pedal-is-pulsating-and-vibrating.html

----------
2002 Ford Windstar: Brake Warning Light ON dash?

http://schematicsdiagram.blogspot.in/2012/06/2002-ford-windstar-brake-warning-light.html

-----------

These details will help.

Thanks.

This may be a clutch problem or a cluthch slave, what is happening is the transmission is not completely stopped spinning, so as you try to go into gear the clutch is not disengaged completely. this can be due to a bad slave or master.

The fluid for the clutch master, make sure its full. if low then you may have a leak. if low fill and pump pedal a few times to see if that helps.

If clutch master is low or full go to trany and locate the cltuch release fork on the transmission at the end you will see clutch slave, make sure there are no leaks. have someone push clutch pedal as you watch the fork move. make sure it move the distance. if its leaking then its bad.


The last thing would be the clutch pressure plate or disc, this is hard to see without removing transmission, If something broke away from cluch plate and is jammed against plate this will keep traany spinnig, but it would also be hard to get into first.

If you can start car in neutral and put into 1st gear without a problem then thats confusing, but if it is hard to go into first also then its in the clutch system. i am guessing you are in first with clutch down when starting and then its hard to get into other gears. good day.

leaking inside car pull back carpet on driver floor near pedals replace clutch master

It sounds like the Neutral safety switch on the clutch pedal or a starter problem. Try pushing the clutch pedal REAL FAR DOWN while starting. If it works have the switch adjusted.
If that isn't the problem try a jump start. If that doesn't work, a starter may be be needed. Try tapping on the starter with a wrench then start.

I happened to do this with 2 people (my friend and I) and it took us about 6 hours.

if serviced on time 300,000 is no problem. normal parts will need to be changed

Brake pedal switch at fault! If it is a Automatic, standard the clutch pedal switch at fault.

I had the saem problem, you should have a code that came with the manual its on a card and it will give you the password. If you dont have one take it to a honda/acura dealership

either your ac condenser went out or your chem? needs to be recarged.