The electronic EGR valve and solenoid assembly
(3) is attached to the front of the right cylinder head (1). An exhaust
gas routing tube connects the EGR valve to the intake manifold.
Disconnect electrical connector (1) from EGR
solenoid (2). Remove two bolts (3) connecting EGR tube (4) to
valve assembly. Remove gasket located between EGR tube flange
and EGR valve assembly.
Remove two mounting bolts (2). Separate
valve assembly (3) from cylinder head (1). Remove and discard
metal gasket located between cylinder head and valve assembly.
The
new EGR valve will come with a new metal gasket. You can reuse the
smaller gasket for the metal pipe going to the egr valve as long as its
not damaged.
TY for using Fixya; remember rated this post.
×