Where can i find a obd1 cable for my scanner for a Geo Tracker
You need the same brand cable.
are you getting 12 volts to it.i have two scanners one power up at battery or cigarette lighter . the other one power up by the diagnostic connecter under the dash. do your scanner have a button you hold down with finger to power it up once it turn on you put it to the car computar then it tells you year of car engine size type of fuel system.do your scanner have a nine volt battery to it.check out every thing . looking at my gm book you can pull computar code from under the hood at at a connector or at the relay box using a jumper wire .
×
1,555 views
Usually answered in minutes!
yes i know where the connector is but looking for a connector for my scanner to plug into the connector under the dash i have the gm connector but can not get any readings. Thanks
yes where do you get the cable i have my scanner but the gm connector that comes with the scanner will not pick up any codes so how do i get this cable to do so
I have no idea, we are not a parts service, this is and issue with a generic scanner, buy the GM OEM tool.
that is the connector for a GM scan tool, generic scanners most likely won't work.
in front of the driver under the dash.
(oldpost)there are on OBD1 scantools for this car, Suzuki never released the protocal. there are hacker sites that did this the hard way. The GM tool is no such think its a TEch1 tool and rare is hens lips. (OTC mean sold over the counter) full answsr here, h ttp://www.fixkick.com/ECU/Tech1/full_scan2.html
sorry no overthe counter tools, for Suzuki OBD1. its not GM its a Mitsubishi ECU. same ECU used on trackers and sidekicks.
95 geo tracker blows main fuse
×