How do i set timing belt tension on 1994 ballade 160i sohc

SOURCE: 2000 ford escort se 2.0L sohc timming belt

the easiest way to help you is you can purchase a repair manual for your vehicle at an auto parts store like napa,Oreillys or auto zone the manuals are around 20 dollars and have all the specifics you will need to do this your self. these manuals have diagrams and step by step instructions. good luck and hope this helps you.

SOURCE: timing belt for 1994 honda prelude

you need to make sure that the #1 cylinder is top dead center of the compression stroke,

SOURCE: Need to replace the timing belt on my 1994 Ford Escort

I suggest purchasing a repair manual and following the steps in there as there is too great a risk of someone putting it on here and forgetting a step that makes it even more difficult or expensive. The auto parts places will loan you the harmonic balancer puller you will need. I have done two on 94 Escorts and it's not too bad compared to others. I would strongly recommend replacing the crankshaft seal while you have the end of the crank exposed, replacing the seal is in the book too.

SOURCE: 2001 hyundai accent 1.5 liter SOHC 12v engine.

With regrets, Not likely, pull the vlave cover and observe the height of the valves, if it is bent it should be not quite as tall as the rest.

michael schultz

• 1068 Answers
• Posted on Sep 18, 2009

SOURCE: can i replace the timing chain tensioner without

you don't have to remove the head to do the timing tension er but will have to do the belt! just get a book and line up the timing marks before you take it apart! good luck