Most people have the misconception that a trouble code tells you what part to replace. The fact is the code tells the mechanic only what to check.
The problem could be a sensor, or a wiring harness, or something mechanical.
SOURCE: 104,000 miles transmission issue
The trans in your vehicle is a 4L30E.The check,and fill plugs are in the pan.The fluid has to be checked after the vehicle is fully warmed up,engine running,in Park.The hard to shift into 2nd gear is kind of difficult to say,check the level,maybe have it scanned for trouble codes esp. if check engine is lit.Those particular transmissions have one weak area,and thats the Low gear,or first gear band and drum.That causes a symptom of slip and chatter on takeoff from a complete stop.
SOURCE: An Isuzu Axiom check engine
Hello,
I had the same issue in mine and it ended up being my spark plugs. I had to replace them with "Isuzu" brand plugs and my light turned off.
SOURCE: my isuzu axiom 2002 model indicates check engine what do i do?
check engine light indicates that the computer in your vehicle has sensed a electrical problem pretaining to the performance of the engine usualy a diagnostic scan would determine the actual cause, vehicle has to be hooked up to a diagnostic tools.
SOURCE: check engine light is on,
if you speedometer is not working this is why you check engine light is on computer need this info to send proper amount of fuel to engine
SOURCE: i have a 2004 Isuzu Axiom, my check engine light
You may have actually had a faulty MAP that needed replace. Thing is that any time you get a "check engine", the cruise will be disabled. you must clear the code, by either a trouble code diagnostic tool, or disconnect the battery for about five minutes. Codes will clear, and cruise will start working again.
128 views
Usually answered in minutes!
×