Engine diagram for a 2000 Mercedes-Benz C-Class where is the mass air flow sensor located?

Mercede-Benz C-Class w202 (1993 - 2001) - fuse box diagram

https://www.autogenius.info > mercede-benz-c-class-w2...
Jul 4, 2018 - Main fuse box in engine compartment (as of 31.5.97) ; 31 · 15, as of 1.6.98: Right low beam ; 32, 7,5, up to 31.5.98: Left low beam headlamp ; 32 ...

• 
  

  Mercedes C Class w202 engine C280 (1999) - fuse box

  https://www.autogenius.info > mercedes-c-class-w202-e...
  Nov 13, 2015 - Mercedes C Class w202 engine C280 (1999) - fuse box. Year of production: 1999. Fuse designation (main fuse box) - (202 545 38 00). Mercedes C ...
  

C-Class » Fuse Diagram

https://knigaproavto.ru > shemy > mercedes > c-class
Fuse Box Layout Mercedes-Benz C-Class: C180, C200, C220, C230, C240, C250, C280, C36, C43, C55 (W202 & S202; 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, ...
‎1993-2001 Mercedes-Benz... · ‎2007-2014 Mercedes-Benz...

Fuse box diagram Mercedes 202 and relay with designation ...

https://fuseandrelay.com > mercedes
Main fuse and relay box. It is located under the hood on the left side of the engine compartment and can consist of two sections (fuses and relays).

Here are the fuses and relays.

Mercede-Benz C-Class w202 (1993 - 2001) - fuse box diagram

https://www.autogenius.info > mercede-benz-c-class-w2...
Jul 4, 2018 - Main fuse box in engine compartment (as of 31.5.97) ; 31 · 15, as of 1.6.98: Right low beam ; 32, 7,5, up to 31.5.98: Left low beam headlamp ; 32 ...

• 
  

  Mercedes C Class w202 engine C280 (1999) - fuse box

  https://www.autogenius.info > mercedes-c-class-w202-e...
  Nov 13, 2015 - Mercedes C Class w202 engine C280 (1999) - fuse box. Year of production: 1999. Fuse designation (main fuse box) - (202 545 38 00). Mercedes C ...
  

C-Class » Fuse Diagram

https://knigaproavto.ru > shemy > mercedes > c-class
Fuse Box Layout Mercedes-Benz C-Class: C180, C200, C220, C230, C240, C250, C280, C36, C43, C55 (W202 & S202; 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, ...
‎1993-2001 Mercedes-Benz... · ‎2007-2014 Mercedes-Benz...

Fuse box diagram Mercedes 202 and relay with designation ...

https://fuseandrelay.com > mercedes
Main fuse and relay box. It is located under the hood on the left side of the engine compartment and can consist of two sections (fuses and relays).

Why did you have this part changed? Codes?

Look in the air intake system, there is a mass air flow sensor from the air filter...




Part Replacement link HERE

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

2710940248
VDO-Siemens OEM
Air Mass Sensor you can get it online either by ebay or autohouse az, prat no and details above,

according to your information it's faulty mass air flow sensor, check mass air flow sensor first, when the Idle rough just disconnect the air flow sensor wiring socket if it's better than when it's connected it's faulty air flow sensor, mass air flow sensor have fitted between air cleaner housing and throttle body, you can see wiring connector been connect on it you have to turn it anticlockwise and remove it. when you fix it back do the reverse order, if it's faulty replace air flow sensor. is this information helped you?

M112 And M113 Engines

1. Before servicing the vehicle, refer to the precautions.
   

2. Remove air filter housing.
   

3. Remove hot film mass air flow sensor.
   

4. Remove air duct housing.
   

5. Release and disconnect electrical connector at crankshaft Hall sensor.
   

6. Remove bolt.
   

7. Pull crankshaft Hall sensor out of crankcase.
   

   CKP sensor location
   

To install:

1. Installation is the reverse of removal.
   

2. Tighten crankshaft Hall sensor to crankcase bolt to 6 ft. lbs. (8 Nm).
   

3. Carry out first initialization and then sensor rotor adaptation using Star Diagnosis tool.
   

mass air flow is right behind the air filter box if it's a c230 kompressor.

Hi, both codes indicates a bad Mass Air Flow Sensor..
The airmass meter is a common problem. CRC makes an aerosol "Mass Air Flow Sensor Cleaner" that you can try to use to clean sensor.It is located in the intake hose between the air filter housing and the throttle body.

Take care

It is OK to drive it I recommend you fix it when you can It is most likely the stop lamp switch located on the back of the brake pedal part is 25-35 dollars depending on where you live have it tested before replacing. If it tests good you have a faulty brake sensor in one of your wheels check brakes