Needing a engine diagram or vacuum hose diagram

Question edited for clarity. Year Make Model FIRST.

https://www.google.com/search?q=1995+Chevy+Corsica+3.1.+vacuum+hose+diagram

..

1999 Ford Ranger Vacuum hose diagram
Pamela, Normally vacuum line routing can be found under the hood of truck, on Rad support or on the underside of hood. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Ranger Engine Vacuum Hose Diagrams
Vacuum Lines The Ranger Station Forums
Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com

1. Vacuum Hose Diagrams‎

   smarter.com/Vacuum+Hose+Diagrams‎Engine Vacuum Line‎ www.about.com/Engine+Vacuum+Line‎rating for about.com
   Engine Vacuum Line. Search Now!
   Over 85 Million Visitors.

2. Vacuum Hose Diagrams‎

   www.fixya.com/Vacuum+Hose+Diagrams‎
   We Are Here To Help You For Free!
   Solving Problems Is Easy As 123.
   

Not sure of your engien size as you didn't say so I went with the most common enegine the 3.8 liter. Again I wasn't sure of what vacuum diagram you needed as the is vacuum for emissions, air conditioning and cruise control. the picture above is for emissions for the 3.8 liter engine. Hope this was what you were needing but if you have a different engine (305 or the 3.8 turbo) you can reply back here with what diagram you needed or the correct engine. Hope this helps...

You will need a Vacuum hose diagram to hook thes up correctly. There should be a diagram on the hood or raiator cover of the vehicle. If the diagram is missing you will have to take ALL info from your car (Year,Make, Model, Engine size, Engine code) and obtain the diagram from a dealer.

Click over image diagram for zoom...

Fig. 52: 1993 4.3L engine - federal

Fig. 53: 1993 4.3L engine - California

Fig. 54: 1993 4.3L engine - California alternate

Fig. 55: 1993 4.3L engine - federal alternate

Hope this helps.

Hello redeemer524,

Below is the diagram. I hope this helps.



Regards,
netvan

SPI Vacuum Diagram


Zetec Vacuum Diagram

SPI Vacuum Diagram


Zetec Vacuum Diagram



Zetec Vacuum Diagram

If it's equipped with the 2.0L SPI engine (eighth digit of the VIN is 'P'), the most common place for a vacuum leak on these engines, is from the PCV hose that runs from the valve cover to the back of the throttle body. Where it usually rots through is the elbow at the back where it connects to the throttle body. Hope this helps. The only place i could find any views is here. vacuum hose diagram - Focus Fanatics

Vacuum hose routing-1989 2.5L California Turbo I engine




Vacuum hose routing-1990-91 2.2L and 2.5L Federal engines with manual transaxles, and 2.2L and 2.5L Canadian and California engines




Vacuum hose routing-1990-91 2.5L Turbo I California engines




Vacuum hose routing-1990-91 2.5L Turbo I Federal and Canadian engines

Hope helped with this information (remember rated this help) Good luck.

truck normally has a vacuum hose routing diagram on under side of hood on drivers side.also look for metal tag on center of engine compartment fire wall which gives you a motor id @ and trk model # you can then know what engine vacuum diagram you need.i have a diagram for an 86 720 series Z24 carb engine that can be copied off of truck..chris