Question about Cars & Trucks
Timing Chain: Service and Repair
Tools Required = Crankshaft Sprocket Puller
1. Remove the timing cover.
2. Remove the crankshaft position sensor reluctor ring.
3. Remove the camshaft sprocket bolts.
4. Remove camshaft sprocket.
5. Remove timing chain.
6. Remove the crankshaft sprocket.
7. Remove crankshaft sprocket key.
1. Install the key into the crankshaft keyway.
2. Use the crankshaft balancer installer to install the crankshaft sprocket.
3. Install the camshaft sprocket and timing chain.
4. Install camshaft sprocket bolts.
Be sure to align the camshaft and the crankshaft sprocket marks. Timing marks (Number 4 Firing).
Tighten bolts to 21 ft. lbs.
5. Align the keyway on the reluctor ring with the key in the crankshaft.
6. Install the reluctor ring onto the crankshaft until the ring is completely seated against the crankshaft sprocket.
7. Install the timing cover.
Don't know what Wire you are referring to.
Posted on Nov 09, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hi some of them have a belt but yours being the M43 engine is a chain, the only thing to listen for with them is chain slap or an rattling around the chain area, a bit of research on the M43 engine also shows that the chain should be changed after 100000 miles as they become weak, Just joined here and found this unsolved i know its a bit late but hope the extra info helps
Posted on Dec 03, 2008
The wire is either at the firewall under the black cover with the three plactic nuts. Or its under the passenger carpet all the way above the passenger feet. Or its right in the corner between glove box and door. If its never been touched it should be wraped and held in place with tape.
The wire is brown. Also if you want to bypass that what we do is goose the engine. For a split second the timing will drop to 0 if you do a quick 1500 rpm goose.
At idle with the wire hooked up about 16 to 18 degrees is normal. As soon as you unhook the wire it should drop to 0
Posted on Apr 07, 2010
The temperature sensor is where I would start. If the sensor tell the computer that the engine is cold it will initiate the warm up mode which includes advancing the timing along with a rich fuel mixture. Unfortunately, there are many sensors that assist in controlling timing and fuel mixtures that it is difficult for me to give you a guaranteed solution.
Posted on May 27, 2010
Tips for a great answer:
Jan 14, 2013 | Cars & Trucks
Mar 05, 2012 | 1993 Chevrolet S-10
Jun 25, 2011 | 2006 Suzuki Forenza
May 28, 2011 | 2002 Chevrolet TrailBlazer
May 18, 2010 | 1993 Jeep Grand Cherokee
Dec 31, 2009 | 1995 Mercedes-Benz E-Class
Apr 28, 2009 | 1993 Toyota Camry V6
Feb 11, 2009 | 1993 Saturn SL
Dec 14, 2008 | 1994 Chevrolet Sportvan G30
Jul 10, 2008 | 1993 BMW 3 Series
Oct 17, 2019 | Cars & Trucks
204 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: