Hyundai Motor 1998 Accent Logo

Related Topics:

Posted on Apr 01, 2009

Hyundai accent 98 error code p0447 - Hyundai Motor 1998 Accent

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Apr 01, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Apr 01, 2009
Answers
1
Questions
0
Helped
419
Points
3

Disconnect the battery for an hour and the check engine light should go off ... it posiby resets everything, hiope it works for you!

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where can I find the ECU Connection in the engine bay on my 1998 Hyundai Accent XS 1.3 and what does it look like.

790 pages of service info which may provide some help on 98 Accent 1.5 below
https://automotrizenvideo.com/wp-content/uploads/2011/11/manual-de-despiece-hyundai-accent-98-1.5-SOHC.pdf
If you are looking for all equipment which has a connector to the ecu or ecm a wiring diagram would provide info as to where the ecm get info from and where it sends it to.

https://www.cargurus.com/Cars/Discussion-c2203_ds502664
Some general info in link below. Basics of video crank sensor keeps blowing fuse to ecm.
https://www.youtube.com/watch?v=ubkHu4gPbbc
1helpful
2answers

I have two codes come up when checking why my check engine light is on. P0447 and P0420. Any info on what these mean and what it takes to fix so I can pass my smog test??

press the helpful button
Definition of P0420 is catalyst below threshold. This is indicative of (among other things) a converter that is not working as efficiently as it should be (according to specs). Catalytic converters are not normally a "wear" type item, that is they are not deisgned to wear out and need replacement. If they have failed, it is likely due to something else that caused it to fail.

P0447 Evaporative Emission Control System Vent Valve/Solenoid Circuit Open. The Powertrain Control Module (PCM) has detected an open within the circuit that controls the vent valve or solenoid for evaporative emission systems vapor.

Read more at: http://www.obd-codes.com/p0447
Copyright OBD-Codes.com

http://www.trouble-codes.com/

http://www.obd-codes.com/trouble_codes
0helpful
1answer

Error code p0650

OBD II codes are specific to manufacturers and often specific vehicles. A Hyundai Accent P0650 may not be the same as a Hyundai Sonata P0650 because Hyundai loaded more diagnostic codes into the upscale Sonata.

Check with AZone or similar, they'll tell you the code description, and give you possible suspect causes to check.
0helpful
1answer

Looking at a 2000 hyundia accent but has a check engine light code of po447 is this a big problem

Research revealed no data availabe for code P0447 - doesn't exist for Hyundai Accent.

There are codes P0446 and P0445, but nothing with P0447.
0helpful
1answer

Car will not start and when scanned I get the problem code P0447

EVAP Vent Solenoid Circuit. Check the solenoid valve on the Fuel Tank vapor circuit.

P0447 Evaporative Emission Control System Vent Control Circuit Open
0helpful
1answer

Radio code

call a dealer with your vin
1helpful
1answer

Will a 1995-96accent transmission fit a 98

Hi, as long as the engine's the same (single or twin cam), as far as I know they're identical, should fit straight in. Hope this helps :)
3helpful
1answer

98 Hyundai Accent, front windscreen wash not spraying Pump runnin

If you dont have access to compressed air and a blow gun , to blow down the jets, then use a needle and try to clear the jets, and then try the wshers, you will have to adjust the jets after. If you still have nothing, or it is very weak, then remove the pipe and blow down it , also with the pipe off, try the washer pump to see if it is pumping strongly, because, although the pump is working/making a noise, it may be too weak, in which case you will need to replace the pump.
Hope this helps
2helpful
1answer

98 hyundai accent service engine light came on and then the engine quite, Any ideas?

It could be one or more things. You need to have a code scanner plugged into it, to find out for sure what the problem is.
Not finding what you are looking for?

429 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...