SOURCE: Nissan altima 1999 timing chain
i'am putting new timing chaining on my 99 nissian 1.6 duel overhead cam, how do i line them up. thanks
SOURCE: I have 97000 mile on my 05 Nissan Altima 3.5 SER
That's a load of **** they are feeding you.The timing chain tentioner has a fault and not tentioning the chian.I think you have done a good thing keeping it on synthetic oil.That causes less wear on moving parts than other oils.
SOURCE: I need to know how
I really hope you know what you're getting into.....Big & detailed job. I went on and posted the instructions as far as removal and installation of the timing chain. There is a whole other section that you need as far as removing the oil pan and strainer but way to much to post on here at this point. Anyhow, it's a 2 piece oil pan and just to let you know alot of the parts like the timing chain cover, oil pan, the cover on the timing chain cover does not have gaskets and Nissan doesn't either. You have to use some RTV and don't go cheap, get the good stuff because all the work that is involved in this you don't want to have to repeat because of a leak. Also the oil pump is in the timing chain cover and Nissan has had some problems in the past with them. I would suggest going online and finding a new oil pump that comes pre-installed in a new timing chain cover. You can pick the whole assembly including the cover for about $150.00 and worth it. Wish you were here I have one ready to go. Anyhow, email me at [email protected] and what I can do is send you the engine management section of my service manual in a PDF so you have the info on the oil pan removal.....You need it. It will also have all the stuff I am posting below so you can make it big enough to see or even print out if need be and no there isn't a cost for it. I'm in a good mood....lol. I hope this helps. Here is the timing chain instructions for you.
32 views
Usually answered in minutes!
×