Question about 2004 Honda CR-V

1 Answer

2005 Honda CRV dome light goes out, but not burned out

When I open the dome light cover and adjust bulb it comes on again. Dome light in my 2004 CR-V was intermittent for a while. Now doesn't come on at all. Bulb and fuse look OK. I used electronic cleaner on the switch and checked the wiring. Still no light. When problem started light would come on with passenger doors open but not the drivers door.

Posted by on

  • 1 more comment 
  • grandmajlynn May 17, 2009

    Dome light comes on occasionally but lately not at all. At first I thought bulb was burned out so bought new one and it worked for about 3 weeks and now is out again. My CRV is a 2006.

  • hisham_19732 May 11, 2010

    dear sir

    after due respect

    i have bmw 318 i model 2000 before three days the motor oil led
    indicator appear when i use the break and disappear when i remove my
    leg from the break , and the led appear from time to time , when the
    car drive the red led disappear

    and i check the oil level its ok , and there is no any leak



    please help me to solve this problem



    waiting to hear from you asap



    best regards

    hisham





  • Anonymous Mar 17, 2014

    only driver side dome light works when the door is opened.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Filament gets fractured, possibly by vibration of the roof lining. I have replaced mine 4 times and while the bulb looks OK it is high resistance, buy a few bulbs and replace them when it occurs.

Posted on Mar 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 chevy cavalier dome light not working


Check bulb for continuity and also check the position of switch for the dome light.

Aug 26, 2017 | Cars & Trucks

2 Answers

2004 Monte Carlo as dome lights don't work and fuses are all good and won't work from the doors or the light switch


remove the cover of the dome light and check the bulb,look at the filliment to see if they touch each end,change if neccesary

Dec 17, 2016 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

Ford taurus tss 2004 map lights work but dome light wont come on


It is possible the bulb in the dome light is burnt out or there is a bad connection @ the bulb. That is at least where you start. you will need to remove the dome light cover & wiggle the bulb while the door is open, or best to have two doors open to remove the possibility of a faulty switch. If it still doesn't flicker or start to work remove the bulb & inspect it to see if the filament is broken. If you can't tell best to replace the bulb & try again.
Please advise if you need more help.

May 29, 2014 | Cars & Trucks

2 Answers

Chevy trailblazer problems


its either a bad door switch,or could be the dome override switch by headlight switch,or your interior light switch is all the way up

May 01, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

Replace dome light


If the dome light cover is retangular in shape simply press in both long sides at once and the cover should come away. pull out the bulb and replace .Simply press the cover back in place once done

Jan 12, 2013 | 2004 Honda CR-V

2 Answers

How to replace interior dome light bulb?


1) Remove the key from the ignition. Make sure the doors are closed, so the new bulb does not illuminate when you are installing it.

2) Make sure the dome light switch is turned to the "Off" position. Pry the plastic lens away from the dome light. Use a small, flat-head screwdriver.

3) Push back the side bulb clamp. Pull out the old dome lightbulb. Wipe the area with a paper towel if it is dirty.

4) Wrap the new bulb in a paper towel (oil from your skin will shorten its life). Insert it into the dome lightbulb holder. Push it up gently to secure it.

5) Turn the switch to "On" to test the bulb. Reposition the cover and push up to lock the clips into place.

If the bulb doesn't work, you've got a bad switch somewhere, probably on the drivers door.

Dec 26, 2010 | 2006 Toyota Highlander

1 Answer

Have a 04 super cab ranger tremor and when i turn the dome light and the door ajar light comes on how can i fix that


turn off the dome light.


the door opens, it turns on the dome light, so the wire that goes from the door switch gets powered up and makes your dome light come on. if your door is closed, and you turn on the dome light, the same wire gets power and is actually sending power to your light bulb on the dash.
just ignore it , or get a diode and put it on the correct wire, and it wont allow the electricity to flow back towards the light bulb when you put the dome light on.

Jul 31, 2010 | 2004 Ford Ranger

1 Answer

2005 Honda CRV dome light goes out, but not burned out


Without seeing it, I would guess that you have a problem with clean contacts. Especially in cars with smokers, the contacts of something like a fuse or a light bulb can become corroded just enough to stop the light from working. Wiggling it scrapes away the debris and allows for contact. I suggest that you take some steel wool and lightly scrub the contact points on both the light and the fixture. **Be sure to have all the doors closed so you dont short out the steel wool.** If you are concerned with the abrasive nature of the steel wool, a pencil eraser will sometimes work just as well. Either way, it just sounds dirty which is par for any car. Good luck!

Feb 26, 2009 | 2005 Honda CR-V

1 Answer

2004 PT Cruiser dome light doesn't work


If there is a switch on the dome light, that may be your problem. You would need to remove the assembly and check for voltage coming into the switch using a voltmeter with the door open.

May 30, 2017 | 2004 Chrysler PT Cruiser

Not finding what you are looking for?
2004 Honda CR-V Logo

677 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...