Ran truck out of fuel. After Found fuel in my base oil, truck ran find. Fixya said that this is caused by a injector stuck open. Took out the injectors and cleaned them and blow compressed air through them. Put them back in. Now the truck will start and idle find, but it will not rev over 2000rpm. I have a OBDII code reader, it gives code PO380 Glow Plug/Heather circuit malfunction, Code PO202 Injector circuit malfunction Cylinder #2, and code P1262 cylinder #2 High to Low side short. What is high to low side short mean and which cylinder is #2, how can you tell.
SOURCE: 1998 Chevy s10 4 cylinder running rough
1- check there is spark come from spark wires
2- check the fire timing by looking for every wire in the right place
3- check there is injector signl
4- check for any vacuom leak
5- try to clean the MAF by brake and parts cleaner
6- try to reset all the code and see what will come after that
63 views
Usually answered in minutes!
×