I cant get my Cadillac Catera headlamp to turn on. Along with the headlamps the guage lights won't work. I can turn the headlamp switch to the on position and hold the low/high beam switch back and the brights will work, but I have to hold it back while driving. I have checked the fuses and all are good. What else can I do to resolve this problem
SOURCE: Escalade headlamps do not work.
The problem is probably your switch assembly on the column. When you pull in to go to brights they go out right? I ahd the same problem and replaced the whole unit on the column.
SOURCE: 1998 cadillac deville high beam head lights only
Classic switch problem. Replace your switch and this will fix your problem.
SOURCE: How to aim the headlamps on a 1999 Cadillac
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
support.
You will have vertical adjustment screws for each independent beam
(separate highs and separate lows, but will be same screw if highs and
lows are the same bulb). You may also have additional horizontal
adjustment screws as well
Park
your car on a level ground 30 feet from a wall and measure the height
from the ground to the bulb and mark on a wall (do this for highs beams
and low beams if the bulbs are separate, if highs and lows are the same
bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then
aim the brightest part or cutoff part just below the mark on the wall.
If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
SOURCE: Seat Heaters not working - 1999 Cadillac Catera
Check the relay for the heated seats first. If not working none of the seats will get warn or hot
174 views
Usually answered in minutes!
×