These 3 codes are the ones scanner brings up,po440,po441,po420
P0420 is catalyst system efficiency below threshold (bank 1)
P0440 is evaporative emission control system malfunction
P0441 is evaporative emission control system incorrect purge flow
What this looks like is an EGR valve problem.
Not an expensive part...no special tools required.
Nothing to do with shifting...this is the emissions system.
P0420 means this:
What this means, in a nut shell, is the Three Way Catalytic Converter (TWC) is not working properly.
You have an emissions problem.
P0441:
This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
EVAP emission canister purge is contolled by a valve which allows engine vacuum to pull stored fuel vapors from fuel tank into the engine to be burned, rather than be vented to atmosphere. A vacuum switch is used to detect when flow exists. If the PCM commands purge and sees that the switch is closed (indicating no detected purge flow) P0441 is set.
A code P0441 could mean one or more of the following has happened:Bad vacuum switch
Broken or damaged EVAP line or canister
Open in PCM purge command circuit
Open or short in Voltage feed circuit to Purge Solenoid
Faulty purge solenoid
Restriction in EVAP solenoid, line or canister
Corrosion or resistance in purge connector
Bad PCM
Yes, it's the beginning of the faults anf it is specifying that the evap system in general has a malfunction.
Please don't forget to rate!!!
×
4,103 views
Usually answered in minutes!
hydro are these major problems to fix or minor?
i just bought this car from a dealer and took it to his mechanic ,they tried to tell me the code that came up was for a shifting sensor and if light came on again to just drive it and he cleared codes 4 days later light was back on
with the codes i mentioned
thank you great help you didnt mention the code po440 is that part of the po441
thanks alot hydro really appreciate take care
what does it mean
mil on po440 smoked system replaced cap leaking still flagged po440 any help
×