I just installed a new radio in my 03 Outlander. I used a scosche wiring harness, no factory wires were cut or damaged. The new radio does not work, and when I plugged the stock radio back in, it doesnt work either... I have installed dozens of radios and have never experienced this before... I have checked all the fuses... any suggestions?
SOURCE: wiring a radio
http://www.installdr.com/Harnesses/Mitsubishi-Wiring.pdf
here is the wire diagram for your car this should fix your problem
SOURCE: radio wiring
1996 Mitsubishi Montero Car Audio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Red/Black
Car Radio Accessory Switched 12v+ Wire: Blue
Car Radio Ground Wire: Chassis
Car Radio Illumination Wire: Green/White
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: White/Black
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): White/Blue
Left Front Speaker Negative Wire (-): Black/Blue
Right Front Speaker Positive Wire (+): White/Red
Right Front Speaker Negative Wire (-): Black/Red
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Yellow/Blue
Left Rear Speaker Negative Wire (-): Gray/Blue
Right Rear Speaker Positive Wire (+): Yellow/Red
Right Rear Speaker Negative Wire (-): Gray/Red
-->
SOURCE: need wiring information for harness on stock infinity cd player
Uhm need more information here.
SOURCE: i am looking for a
Go to this website it may help you out .....
http://forums.evolutionm.net/lancer-audio-security/6686-here-instructions-installing-stereo-head-unit-5.html
SOURCE: My accessory sockets (cigarette lighter) are not
It's fuse # 25 a 15 amp. There is a relay in this circuit and the ignition switch must be on or accessory. By the way, sometimes what you are trying to plug in just doesn't make good contact.
53 views
Usually answered in minutes!
×